87 Monte SS

[Bumpin1ohmSS]

Bruh that breakdown looks so good man I can't wait to see the ss again after the next stage of work. I see your really about to bring that wow factor alright with the twins. All I know when it's all said and done your going to have to let me drive it a few blocks around moval 1 time. Your going to love that por-15 so much it's 1 of the best after market companies that supply rust/ paint product for cars and I just love the stuff.

Oh trust me bruh. When its running we gonna try to break the 9" rear thats goin in it!! LOL! My motivation is the SS thats out your way. Bruh that would be SSweet if you could find out more info on his build for me. Imma hit him up on youtube also.. Man Im a huuuuge fan of POR. The G National 8.5 rear thats in the SS now is done in Por. Really smooth. Yessir. Im getting all the parts and stuff together so I can sand blast the whole front clip right in the "shop" Gonna get a couple of plastic drop clothes and duct tape em and make a ghetto rigged blasting booth. H Freight has all the safety gear and everything I'll need to get it done. "Foose" will find me a 5.3l for now just to get things goin. But I will eventually have a 6.0 GTO with 6 speed setup rebuilt to handle twins. (I think thats the one I want) The trucks are the "LQ4" setups and the cars have the "LS" right? Imma hit LS1tech up. Been a member over there for a while but never really looked into it until now. Cant wait. The motor will be my bday/Christmas present Thanks for swingin thru bruh.

Elco Warren
80zBabiez

[Dave V]

lq9 truck 6.0 is not bad either but ill make u a deal if you gonna get a deal on the 5.3 lq4 when your ready to sell i want 1st dibs on buying it cause then i just may go lq4.....cant wait till you get this thing running....

[Dave V]

when this car gets done im gonna say this watch out world cause the og iroc king is coming to town with a can off woop ass that is all i can say but i will be there to help you warren in any way i can.

[LSCustoms]

Bruh that breakdown looks so good man I can't wait to see the ss again after the next stage of work. I see your really about to bring that wow factor alright with the twins. All I know when it's all said and done your going to have to let me drive it a few blocks around moval 1 time. Your going to love that por-15 so much it's 1 of the best after market companies that supply rust/ paint product for cars and I just love the stuff.

Oh trust me bruh. When its running we gonna try to break the 9" rear thats goin in it!! LOL! My motivation is the SS thats out your way. Bruh that would be SSweet if you could find out more info on his build for me. Imma hit him up on youtube also.. Man Im a huuuuge fan of POR. The G National 8.5 rear thats in the SS now is done in Por. Really smooth. Yessir. Im getting all the parts and stuff together so I can sand blast the whole front clip right in the "shop" Gonna get a couple of plastic drop clothes and duct tape em and make a ghetto rigged blasting booth. H Freight has all the safety gear and everything I'll need to get it done. "Foose" will find me a 5.3l for now just to get things goin. But I will eventually have a 6.0 GTO with 6 speed setup rebuilt to handle twins. (I think thats the one I want) The trucks are the "LQ4" setups and the cars have the "LS" right? Imma hit LS1tech up. Been a member over there for a while but never really looked into it until now. Cant wait. The motor will be my bday/Christmas present Thanks for swingin thru bruh.

Elco Warren
80zBabiez

they are all refered to as LSXs really and they all differ a little as far as names, LQ/LM/or just L motors as far as the trucks, some were vortec max, some aluminum block, some irom block, different cams, different sizes, etc. a nice 6.2 can be had, with some patience, for a good deal...

[LSCustoms]

Ive found you three 5.3s and you say no thanks to them...

anyhow little update since Warren being all hush hush... found him a 305. so we gonna jump on that and take our time with it... after im done with its initial phase Warren can put his touch on it... then its on...

[Bumpin1ohmSS]

Cool cuz I'm ready to start stripping all the paint and get the fire wall smoothed and other stuff going. Im trying to get the 305 in 2 weeks. Been hustlin hard and got my paper up. Let's get it!!! That dash is gonna bust nicely in there. Gonna have a panel made to hold the ac unit. Can't wait bruh. Been window shoppin for parts. Ready to get it crackin. Preciate all Tha help!

Elco Warren

[LSCustoms]

[LSCustoms]

[84cutlassjuggalo]

that's a clean instal, also that bike you have is sick as hell. love the wolfman theme.

[LSCustoms]

that's a clean instal, also that bike you have is sick as hell. love the wolfman theme.

thanks

[littlerascle59]

Mayne I just checked out the entire thread. I'm lovin it mayne. Can't wait to start on my Cutlass, Your MC is pure inspiration.

[Bumpin1ohmSS]

Mayne I just checked out the entire thread. I'm lovin it mayne. Can't wait to start on my Cutlass, Your MC is pure inspiration.

Preciate' that fam! I was just about to update this thread and got an email saying someone had posted up. The motor, trans, rear and suspension have been yanked out. Going full frame off. Might as well since all the stuff is pulled. Gonna get some taller jacks to support the body. Doing a full undercarriage clean up also. I was just gonna strip the firewall and front frame, looked at it all and said WTF!!! Might as well pull it all...here's where I was the other day when I decided to go full frame off I still need to pull the steering stuff, gear box and I'm taking the fenders off also





I was just about to strip the front of the frame and said what the hell. I'm pulling it. This is all new to me. Never did anything like this before so it's all a learning experience..





Elco Warren
80z up!!!


Oh man!! Wish me luck..

[melman109]

This car is the inspiration behind my build... Can't wait till June when I can get back down there to help big bro! You and skip are changin the game!!!

[Bumpin1ohmSS]

This car is the inspiration behind my build... Can't wait till June when I can get back down there to help big bro! You and skip are changin the game!!!

Thanks fam!!! Oh I'll have plenty for you to do. Haha!

Got a lil more done. Fenders are off. All the nuts and bolts are tagged and bagged. Gear box, steering shaft, steering column are out also...









I'll be picking up this kit from summit


Along with new hardware. I won't be using any of the old hardware. Anti seize and all the usual goods to keep everything in check...

Headed to help Big Saint with his suspension In the morn, then try to do a lil more on the SS. Drop the fuel tank, get 4 more jacks and some 4x4 pieces of wood to hold the body up. Pretty excited about all of this. Moving right along at a cool pace.. Thanks for checking back

[LSCustoms]

moving right along, we need to fire up BCT too... hell both these nice ass rides, will be hitting the streets soon!