i bought a set from RockAuto as well. Definitely well made and went together as easy as i imagined. I also got the S10 Moog Lowers and they were just as nice, just had to drive the lower control arm mounts on the frame out for a larger bolt.
HOLY FRIGGEN SWEET....... NICE JOB MOOG!!!!!!
- Thread starter TURNA
- Start date
- Status
If you replaced the lower arms bushing would you still have to drill out the frame mounts?
I dont think you would have to if you swapped to the GBody bushing. I think the bolts on the G's are 7/16's and the s10's were 1/2.. but i could be wrong on the size. just remember it was really close.
For those looking to get a set
Make sure you get the MOOG PROBLEM SOLVER series Those are USA..
They ALSO make a standard Moog
I have no idea where they are made.
Make sure you get the MOOG PROBLEM SOLVER series Those are USA..
They ALSO make a standard Moog
I have no idea where they are made.
Did the Rockauto listing for the Cutlass actually show the Moogs? I looked on Rockauto for the 80 K10 Chevy pickup and they listed Raybestos, and some Chinese or stuff I never heard of. But if you know the Moog part number (most of the knock off's use it) and plug it into the search function, BLAM! It brought up Moog tie rods for the truck. Seems they try and sell you some oddball stuff unless you REALLY want Moog.
I used Moog for many years as a shop owner and when I get parts now I ask for Moog
With tall uppers you will feel difference in how it handles, doing the UMI bump steer kit would help a lot too. Just those two things will make a huge difference in how any gbody drives, even a street car.... All for about $200
- Status
