Hi everyone , first time posting. I'll try to keep this short. I have an 85 cutlass with a 403 , th350 and 3.23 posi rear. Engine was s
Tock rebuild and stored for an unknown amount of time. Flattened multiple cam lobes on first decent ride. It has an eldebrock 1406 carb, performer rpm intake,comp cams adjustable roller tip rockers. Using stock exhaust manifolds with crossover welded closed , 2 1/4 exhaust. Motor had a performer rpm cam good lopey idle. I know increasing compression would help but it's not in the budget this year. All I want to do is smoke the tires and local cruising. Should I buy another rpm cam or is there something better for torque. Not looking to race or high horsepower numbers. Ty
Tock rebuild and stored for an unknown amount of time. Flattened multiple cam lobes on first decent ride. It has an eldebrock 1406 carb, performer rpm intake,comp cams adjustable roller tip rockers. Using stock exhaust manifolds with crossover welded closed , 2 1/4 exhaust. Motor had a performer rpm cam good lopey idle. I know increasing compression would help but it's not in the budget this year. All I want to do is smoke the tires and local cruising. Should I buy another rpm cam or is there something better for torque. Not looking to race or high horsepower numbers. Ty