What did you buy for your G body today? [2022]

[pagrunt]

Thanks man, I would sincerely appreciate it. The only thing more rare than F body stuff in the yards around here are 91-‘96 B bodies. There’s simply none around anymore. I was aware of the switch you mentioned, that would be fine. Any idea what the Fiero switches looked like?

Here's one from Ebay.

 

[MrSony]

Inner/outer tie rods, center link (bad joint on driver's side which prompted purchase), idler arm and adjustment sleeves. All came with hardware, all greaseable with holes for zerks. mevotech stuff, all under $120 shipped from RockAuto. I've used mevotech quite a few times with no issues. Certainly better than sloppy 37 year old parts. They aren't bad yet, but soon all 4 ball joints (taller lowers) and rubber control arm bushings front and rear will render the steering/suspension fully rebuilt, save for a quick ratio box.

 

[Rktpwrd]

Here's one from Ebay.

Very cool, thanks. I’m guessing by the looks of it, it mounted in the center console. The one yard near me actually has a couple of Fieros in one area, next time I’m there I’ll look again, but I’m pretty sure they were all manual and not power.

 

[86LK]

iirc, all Fieros were power with the control in the center console. which also means a different wiring harness and the only controller to look like that AFAIK. I think the C4 vettes were by far the most plentiful, and there were one or two years in which they actually had heated mirrors. while some of the Camaros etc did have a power version, I've never been able find one in the junkyard.

 

[pagrunt]

iirc, all Fieros were power with the control in the center console. which also means a different wiring harness and the only controller to look like that AFAIK. I think the C4 vettes were by far the most plentiful, and there were one or two years in which they actually had heated mirrors. while some of the Camaros etc did have a power version, I've never been able find one in the junkyard.

Seen a few Camaros & Firebirds this summer but the mirrors were pulled.

 

[CopperNick]

Still Christmas up here and today being Saturday the 31st, not much going on except the usual tsunami of mall rats out for that end of the year bargain; which horde I stay away from like the plague. They are members of the rest of humanity, which makes them all sick.

Happy? New Year




Nick

 

[DSPbuilt]

Here's one from Ebay.

Dang I need one of those! I’ve been wanting to do a center mounted window setups.