My 87 cutlass, someone else build but changing to standards as i go. 355 SBC, roller rockers, goofy thumper cam, eps intake, holley (modded by hardcore holley), qa1 upper and lowers in the rear. Still choosing what arms for the front. 18" Ridlers. Paint is Dark Blue Metallic but lots of clear flaking off and scrapes/dings etc. Apparently very hard paint to match because of the pearl that GM was playing with back then so most likely a satin black for now until a good repaint. 4" Cowl is on the way as it has a drop base air cleaner but still rubs, plan on proper base and an air gap intake.