Got it running. I connected the fuel feed line and return to the regulator backwards based off some misinformation on the interwebs. Thanks Ostrich for that link.
hopefully I’ll have it tomorrow. If the fuel pump is getting power and I’m not getting fuel to the rails, wouldn’t it either have to be the pump or regulator? My main question is can a bad corvette regulator not allow any fuel through.
I don’t have hp tuners handy but I’m trying to get a friend out to the house to check it out. Would checking the signal just be to verify the pcm Is functioning or?
I have a drive by cable 5.3, factory harness striped down based on info from lt1swap. Vats and emissions cleared. Here’s where I’m at, I have spark. My in tank walbro fuel pump primes for two seconds, but then I don’t hear it running. If I jump the relay it will run constant but still no fuel at...
Currently swapping a mild street 5.3 in my 78 el camino. I bought a walbro in tank fuel pump and spectre sending unit. The wiring connectors don’t match up and I couldn’t unpin the top connector. I soldered and heatshrinked the wires. I am wondering if there is any safety concern? I know that I...
Buying a set of American Racing VN805 18" wheels tonight with 245/45R18 tires mounted on all 4. Wondering if I'll run into any rubbing issues up front? Currently stock ride height on a 1978 el camino.
I'm suspecting a blockage within the re manufactured ps gear box. I pressed the pulley on with the correct tool, sits where it should and rotates without issue.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.