carnutjw
G-Body Guru 56
Latest activity Postings Media About
-
-
Been following the FB group and it ridiculousness with this. I may not go this year, was hoping it was somewhere else and we are... -
Not terribly familiar with the Oldsmobiles but here are my thoughts. I think if you retain the bump it will blow people’s minds when...
-
carnutjw replied to the thread Facebook friend?.Do you guys buy undergarments at the same store? Technology is pretty good at making connections
-
I vote to keep the bump. NOBODY will know the bump is not really needed unless you tell them, and the fill piece seems to be already cut...
-
carnutjw reacted to gnvair's post in the thread Finally finished my LSA swap in my 78 Malibu. with
Like.
This is what the completed engine compartment looks like -
carnutjw reacted to gnvair's post in the thread Finally finished my LSA swap in my 78 Malibu. with Like.
How about some videos. I first started it 2 nights before Christmas. I still had the rear bumper off. and a quick 3rd gear pull
-
carnutjw reacted to gnvair's post in the thread Finally finished my LSA swap in my 78 Malibu. with Like.
Details..... The harness has a diagnostic port. I mounted it in the factory location. The harness also had a provision for a check...
-
carnutjw reacted to gnvair's post in the thread Finally finished my LSA swap in my 78 Malibu. with Like.
Intercooler heat exchanger and reservoir and hoses. As previously mentioned, I am using a reservoir. The one I am using is an aluminum...
-
carnutjw reacted to 08Malibu's post in the thread Finally finished my LSA swap in my 78 Malibu. with Like.
Very nice.
-
carnutjw reacted to gnvair's post in the thread Finally finished my LSA swap in my 78 Malibu. with Like.
I modified a 697 bell housing by closing up the original pivot stud hole and moving it to the lower position that the G body fork...
-
carnutjw reacted to gnvair's post in the thread Finally finished my LSA swap in my 78 Malibu. with Like.
While on the subject of the z bar I found the bar shifted over to the left by about an inch. This turned out to be a good thing because...
-
carnutjw reacted to gnvair's post in the thread Finally finished my LSA swap in my 78 Malibu. with Like.
I found a nice bracket sold by Scoggin Dickey to add a pivot ball. This was originally designed for the Gen 5 and Gen 6 trucks. It uses...
-
My new belts came today! Figured I would share. I got these from Seatbelts Plus. They look amazing overall. I really like the GM buckles...
-
Contacting Brian Suter over at Classic G-Body Garage might be a way to promote some type of Collab between the forum and his channel...
-
carnutjw reacted to Clone TIE Pilot's post in the thread 20 years of GBodyForum? What's Next? with Like.
My Regal was a hand me down from my grandmother. I grew up with her driving that car and often riding in it with her as a kid...
-
-
Loading…
-
Loading…
-
Loading…
