Recent content by cherokeechief79

thanks.....can i just pull the buzzer from a car at the junkyard and have it just plug in or is the wiring harness different ?

i see they sell aftermarket buzzer kits that are pretty cheap. im just wondering if everything is there with mine from the factory and possibly i just need to hook it up or plug in a buzzer.

i have an 86 monte and an 84. the 86 has the lights on and the key buzzer and ive been used to it for close to 30 yrs now. the 84 is newer to me and i left the headlights on the other day because it was raining and i forgot to turn them off. is my car just missing a simple plug in buzzer? it...

I want to remove it from my non ss car and put a perfect replacement one I have from another car on.i see the push in clips on the bottom but what else needs to be removed to get it off?

I have the same situation.i have a 700r in one of my montes and it locks up with a toggle switch which I love.i only engage it on the long stretches.it only locks up in 4th gear and it unlocks itself if It drops to a lower gear.this way it doesn't stall if iforget to flip the switch.if I...

I see ssn has used the knurled bushings in his repair.from reading the dorman package it says they come with 2 different size bushings,,,.490 of and .420 of.thats quite a big difference.did you drill it out or is the larger size the size of the hole in the hinge anyway?

I found the plug that goes to the one in the pic.it was in the computer harness that was cut at the fender so I guess it gets grounded somehow thru the computer.also when the clutch engages I can feel that a square solenoid also clicks right on the firewall behind the distributer. I plugged the...

this is on my 84 project. it had the 4.3 6 cyl and I put everything for the ac onto the 350 I put in. I tried to charge the ac yesterday but could not get it to cycle.i thought I had all of the wires hooked up correctly. I started looking at some plugs that I wasn't sure where they went and...

is it a manual wo the cable? could I see a pic of it?

I pulled the inner door panel today and removed the mirror.i tried prying the dent out but it barely budged. how will they repair it if I took it to some place like macco?will they try to pull it out or will they bondo it?

isn't there a way to move the latch so it pulls down lower?then I might be able to adjust the bumper up.

the pass side is up a little more than the driver side .it doesn't look right to me.the car is very straight though and never to my knowledge been in an accident.i tried adjusting the rubber bumper down but that side still looks up a little.is there some way to adjust just that one side down a...

i think that's what its called. both of the upper hold downs have ripped out. there is a stud with a nut that holds it secure and the plastic has broken at the bottom of the plastic. this is right above the licence plate. anyone ever fixed this? I plan on putting a plate holder on that stays...

so ill be fine without the breather on the driver side? ill just put a stubby push in iol fill cap in its place.

hmm I always thought one side needed a breather and the other side got the pcv. if I don't need any hole in one side ill just put one of those push in filler caps in the hole.(probably could never use it because of the ac lines)and call it a day.i was really hoping to fix this with everything in...