Recent content by FlyArmy

  1. FlyArmy

    15x8 front and rear

    I run two different 15x8 inch wheels with a 4 inch BS. One set is a 80's C3 Corvette and the other is a Basset Racing wheel. I run 275/60/15 in the rear and 235/60/15 and 255/60/15 in the front. Works great on my car. A little scrapping with the 255 fronts in tight turns.
  2. FlyArmy

    Are 1986 Pontiac GP and 1986 Monte Carlo SS hoods the same?

    Thanks is advance for any answers. The lines look the same and I was hoping some G-body guys might know if they are the same. I am look for a steel two to three inch cowl hood for my 1986 GP Aerocoupe. Thanks.
  3. FlyArmy

    South Side Machine Performance G-Body Ultimate Handling package

    I am curious if anyone has used this handling package. It looks pretty straight forward and would be great with 2 inch drop spindles. Any information would be appreciated. Thanks.
  4. FlyArmy

    Grey cloth rear seat back....any ideas where to get a new cover?

    Thanks for the replies. I didn't know SMS Auto Fabrics is so close to my home. I will check them out and see if they can help me out.
  5. FlyArmy

    Grey cloth rear seat back....any ideas where to get a new cover?

    The sun has had it's way with the top of the rear seat back in my 1986 Pontiac Grand Prix and it has began to crack and split in a couple areas. Does anyone know of a company that reproduces the cloth rear seat back? Thank you in advance for any leads.
  6. FlyArmy

    LET'S SEE SOME GRAND PRIXS!!!!!!!!!

    My 1986 2+2 Aerocoupe. Awesome car.
  7. FlyArmy

    Help with Lug Nuts for C3 Corvette Aluminum Wheels on a G-Body

    I went to the local Discount Tire with an original C3 lug nut and match them up. The lug nut set worked great. Here is the information if anyone else wants to experiment with Corvette Aluminum wheels. Thanks for the responses. Mike
  8. FlyArmy

    Help with Lug Nuts for C3 Corvette Aluminum Wheels on a G-Body

    I found a set of C3 Corvette Aluminum wheels and decided to try them on my Grand Prix. The only issue is the lug nut thread pitch for the C3 wheels is 7/16 and I need the 12mm x 1.5 thread pitch lugs nuts. The C3 uses a special type lug nut with a flat washer and not the standard acorn style...
  9. FlyArmy

    G80 rear end lubricant recommendation

    Thank you for the replies. I hope to get it done this week. It looks like the Valvoline synthetic will be the way to go with some additional limited slip additive if needed. Question is...can you add too much additive? Will this hurt the limited slip? Thanks again.
  10. FlyArmy

    G80 rear end lubricant recommendation

    I am looking for some recommended rear end lubricants for the G80 Posi rear end? I have no idea when it was last changed so I want to service it before summer. I have a 1986 Pontiac Grand Prix. Thanks in advance.
  11. FlyArmy

    Wheel and Tire fitment question 15x10

    Thanks. I appreciate the response.
  12. FlyArmy

    Wheel and Tire fitment question 15x10

    I found a pair of Corvette Rally that are 15x10 with a 3.75 inch BS. They also have a 295/60/15 tire on them. I believe it might be a little too much for a 1986 Pontiac Grand Prix and will stick out beyond the fender well? Has anyone run a wheel and tire combination like this? Thanks.
  13. FlyArmy

    What size wheels and tires do you have

    Was it hard to make the Corvette wheels fit on your Pontiac 2+2?
  14. FlyArmy

    New from Oregon

    Thank you. It is a lot of fun and it turns heads and starts conversations good or bad. You either like the Aerocoupe or you hate them. :-)

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor