Recent content by vader87

  1. V

    Anyone, Pontiac no A/C?

    If anyone has these non functional air vents, I am looking for some. I need 4 total but will take what I can get. Please let me know!
  2. V

    Original Wiring 81 regal

    Not sure how the wiring is on an 81 but if you look at the firewall connector, it has 2 plugs. The closest to the fender should be all the lighting, wipers, horns etc. The side that is closet to the engine, you shouldn't need. I removed all that side of the plug completely on my swap.
  3. V

    LQ4/4L80e swap first start up

    All piping, hoses, sensors and Meth are now installed. A small power steering leak was fixed. Speed Density Tuning is all setup and ready for the dyno. Unfortunately it will be a couple weeks. IMG_20170713_202952126
  4. V

    Which accessories

    Yeah, luckly I have a LSA in my ZL1 so I now have a spare water pumpo_Oo_Oo_Oo_Oo_O.
  5. V

    Which accessories

    Part numbers LS3-19207665 LSA-19180610
  6. V

    Which accessories

    Correct, that is for the LS3 water pump. Please be aware that a bunch of people are advertising the LSA water pump as a LS3. THEY ARE DIFFERENT!!!!
  7. V

    Which accessories

    Another good one!!! I use ictbillet on my build.
  8. V

    Which accessories

    http://www.lssimple.net/ They have every configuration you can think of. Work Quality is awesome as well.
  9. V

    wiring aftermarket gauges for a gbody ls swap

    I understand but there are different pcms and harnesses. A 1999 LS1 harness and pcm are different from a 2003 LM7 Truck harness which is different from a Corvette PCM and harness.
  10. V

    wiring aftermarket gauges for a gbody ls swap

    Either will work, Remember you are going through fuses and a ton of older wire so I am sure there is a little drop in voltage.
  11. V

    wiring aftermarket gauges for a gbody ls swap

    What harness and PCM are your using? I am asking so I can send you the pins that need to be used. Here are some dash pinouts you will need. fuel gauge- pink wire in the dash. As stated above nothing to do with the swap. volts-brown wire from the dash. Just shows voltage gong through he system...
  12. V

    LQ4/4L80e swap first start up

    I am sure there will be some purists and haters BUT I don't care. Car had major issues when I bought it so I made it better! IMG_20170611_205829180 IMG_20170622_203227955 IMG_20170415_204447514 IMG_20170414_193048816 received_10155277194073646 Grand Prix Dash Swap IMG_20160919_203310.jpg
  13. V

    LQ4/4L80e swap first start up

    No issues, either dent the passenger side tunnel to fit the cooling line fittings or use the banjo type.
  14. V

    LQ4/4L80e swap first start up

    Thank you! Me too!
  15. V

    LQ4/4L80e swap first start up

    Thanks! Those are Jardine Headers and the rest is custom. I know LSsimple can make you just about any accessory setup.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor