Congratulations to tobyp for winning this month! I thought it would be cool to have a month for the cars that only see the streets on sunny days and we had a lot of nice cars cars submitted.
tobyp received 46.9% of the votes this month!
Check out his beautiful Grand National
Back in black, the Mnepit. 1984 grand national 249CI Stroker Alcohol injected beast mode
This car should have been driven off a cliff but I restored it 100% myself, this car was BUILT not Bought.
Everything was replaced
List of options to the build
84 Grand National Hot Air fully restored painted, interior, bodywork by myself | 109 249ci stroker 20 over, molnar rods, 4340 steel crank : Barker Machine and Fab | Wiseco forged pistons | comp cams roller 212/212, pac 1201 springs | TBP 125 cc Roller Lifters | Roll Master Timing Chain | T&D 1:55 Roller Rockers| Ported champion CNC irons | Extreme automatic stage 1 | EA 9.5" 3000 stall | Hughes deep pan | 8.5 posi 3:42 | Aluminum relined drums | Rjc 3" exhaust | Gbodyparts 3" down pipe | Gbodyparts up pipe | TT 6.1 wide band chip | Champion Ported intake | Ported 61.5MM throttle body | Work Turbo TA61 with 61.5mm GT35X wheel | Billet main caps | ARP Studs where it matters and ARP hardware throughout entire engine | 65lb PTE injectors | Accufab FPR | factory ported and cleaned headers | Viking dual adjustable coil overs on all corners | Umi complete 4 corner UCA/lCA | UMI rear sway track bar | ALKY control running 100% methanol | Custom fab 4" CAI into 85MM ZO6 MAF to 3.5" into TB with 9" K&N | Walbro 255 Hot wired | 87 ECM | MAF translator | WilWood 12" 6 piston big brake kit | Dynotech 3.5" Aluminum drive shaft | powerlogger 3.0 | AEM wideband O2 | SM 2.2 update | All electronic sensors upgrade to 86/87 | Hr parts engine and trans mounts| TR6 Ignition module/2 step hot wired
View attachment 38215 View attachment 38216 View attachment 38217 View attachment 38218
Congratulations again to tobyp and thank you to everyone who participated this month!
Next month's thread will be up soon and it will be open to all cars this month so enter yours!
Thanks,
Mike
tobyp received 46.9% of the votes this month!
Check out his beautiful Grand National
Back in black, the Mnepit. 1984 grand national 249CI Stroker Alcohol injected beast mode
This car should have been driven off a cliff but I restored it 100% myself, this car was BUILT not Bought.
Everything was replaced
List of options to the build
84 Grand National Hot Air fully restored painted, interior, bodywork by myself | 109 249ci stroker 20 over, molnar rods, 4340 steel crank : Barker Machine and Fab | Wiseco forged pistons | comp cams roller 212/212, pac 1201 springs | TBP 125 cc Roller Lifters | Roll Master Timing Chain | T&D 1:55 Roller Rockers| Ported champion CNC irons | Extreme automatic stage 1 | EA 9.5" 3000 stall | Hughes deep pan | 8.5 posi 3:42 | Aluminum relined drums | Rjc 3" exhaust | Gbodyparts 3" down pipe | Gbodyparts up pipe | TT 6.1 wide band chip | Champion Ported intake | Ported 61.5MM throttle body | Work Turbo TA61 with 61.5mm GT35X wheel | Billet main caps | ARP Studs where it matters and ARP hardware throughout entire engine | 65lb PTE injectors | Accufab FPR | factory ported and cleaned headers | Viking dual adjustable coil overs on all corners | Umi complete 4 corner UCA/lCA | UMI rear sway track bar | ALKY control running 100% methanol | Custom fab 4" CAI into 85MM ZO6 MAF to 3.5" into TB with 9" K&N | Walbro 255 Hot wired | 87 ECM | MAF translator | WilWood 12" 6 piston big brake kit | Dynotech 3.5" Aluminum drive shaft | powerlogger 3.0 | AEM wideband O2 | SM 2.2 update | All electronic sensors upgrade to 86/87 | Hr parts engine and trans mounts| TR6 Ignition module/2 step hot wired
View attachment 38215 View attachment 38216 View attachment 38217 View attachment 38218
Congratulations again to tobyp and thank you to everyone who participated this month!
Next month's thread will be up soon and it will be open to all cars this month so enter yours!
Thanks,
Mike