HAFRODs 78 Aeroback Salon build

Status
Not open for further replies.

HAFROD

Royal Smart Person
Jul 15, 2013
2,179
3,331
113
Claremore, OKLAHOMA
If you guys have read my budget Monte SS build thread, my wifes work is shutting down. Today, I get called in the office at my work to find out that my boss sold the business. They signed papers today. New owner will be there in the morning. Guess I'll find out my fate then. Don't know what I did to deserve this crap with both our jobs screwed. Not really worried about it right now either. I'll find a shop that can use me or I may open one of my own. If anyone wants some custom work or mechanic work done on their G Bodys, shoot me a PM
 

Injectedcutty

G body LS mafia
Nov 24, 2014
6,057
22,807
113
Louisville, KY
If you guys have read my budget Monte SS build thread, my wifes work is shutting down. Today, I get called in the office at my work to find out that my boss sold the business. They signed papers today. New owner will be there in the morning. Guess I'll find out my fate then. Don't know what I did to deserve this crap with both our jobs screwed. Not really worried about it right now either. I'll find a shop that can use me or I may open one of my own. If anyone wants some custom work or mechanic work done on their G Bodys, shoot me a PM
Damn man, that sucks to hear of the double whammy! I hope it all works out in the long run. With you're skills, I'm sure there is a place that would love to have you!
Or, as you mentioned, if its feasible to open a shop then go for it! All of us are rooting for a positive outcome buddy!
 
  • Agree
Reactions: 4 users

ssn696

Living in the Past
Supporting Member
Jul 19, 2009
5,543
6,662
113
Permanent Temporary
You and Clutch should start up a restoration shop. He's looking for an escape route from NJ.
 
  • Agree
  • Like
  • Optimistic
Reactions: 4 users

Andebe

Greasemonkey
Mar 6, 2017
241
256
43
Indiana
If you guys have read my budget Monte SS build thread, my wifes work is shutting down. Today, I get called in the office at my work to find out that my boss sold the business. They signed papers today. New owner will be there in the morning. Guess I'll find out my fate then. Don't know what I did to deserve this crap with both our jobs screwed. Not really worried about it right now either. I'll find a shop that can use me or I may open one of my own. If anyone wants some custom work or mechanic work done on their G Bodys, shoot me a PM
I know it sounds a little cheesy but,try not to see it as a door closing,but rather one opening. Your skill set has great value anywhere. The secret would be in marketing yourself. Good luck in what comes next for both you and the Mrs.
 
  • Agree
  • Like
Reactions: 3 users

oldmansmonte

G-Body Guru
Oct 29, 2010
594
348
63
Buffalo, NY
Just had a few hours but made it count. I got the head bolt holes and accessory holes thread cleaned. I got the block on the engine stand and ready for assembly. My bearings should be here Monday. I removed the remaining insulation from the roof. Most of it was already gone. Used my respirator and safety glasses cause I think that crap has asbestos in it. I then used my nylon cup brush on a buffer and cleaned the underside of the roof. I taped it off and sprayed it flat black. Then I found out that using Dynamat must be an art form that I don't possess :rofl: It's good enough and should do its job.
View attachment 67569


Does the Dynamat add significant weight or it is nominal? Do the pros outweigh the cons? Literally?


Also that might be the most gorgeous build ever.
 
Last edited:
  • Like
Reactions: 1 users

HAFROD

Royal Smart Person
Jul 15, 2013
2,179
3,331
113
Claremore, OKLAHOMA
Does the Dynamat add significant weight or it is nominal? Do the pros outweigh the cons? Literally?


Also that might be the most gorgeous build ever.
The dynamat is a bit heavier than the stock brown stuff but from a quieter stand point, I'll take it. I'm thinking in a heavy rain storm, it will probably not be as loud. Also the heat from the sun. I have built a bunch of cars but this is my first Dynamat work. I do plan on doing it to my 55 too. Thanks for the compliment too :cool:
 
  • Like
Reactions: 2 users

HAFROD

Royal Smart Person
Jul 15, 2013
2,179
3,331
113
Claremore, OKLAHOMA
So our pow wow at work this morning went OK. The 3 techs (me included) are not getting let go. BUT, the new owner is 25 years old and has a lot to learn quick. He asked me if I'd be interested in building hot rods. I told him not for the money I'm making. I'm going to stay there for the time being but I am going to check on two shops up for rent/lease tomorrow. Also found out about a street rod shop in Tulsa so I'm going to enquire about work. I enjoy working on vehicles and that's what I want to do
 
  • Like
Reactions: 7 users

Bar50

Royal Smart Person
Jan 1, 2009
1,180
870
113
Tulsa, OK
Might be worth it if the new owner is open to some consultation. Steer the direction of the shop or diversify?
 
  • Agree
  • Like
  • Optimistic
Reactions: 3 users

HAFROD

Royal Smart Person
Jul 15, 2013
2,179
3,331
113
Claremore, OKLAHOMA
I worked on my front seats most of the day. I had to strip 4 seats to get 2 super nice set of seat foams. I blasted the pans, brackets, and sliders. Painted everything but only assembled one seat. The vinyl/plastic paint does not match the seat upholstery at all but I can live with it. Its got wrinkles but some good heat from the sun and it will be fine. The chrome side covers are brand new lowers and nice used uppers. I used large body door edge moulding that I found at Pep Boys for the trim around the back and two small pieces on the lowers. Pretty comfy too
20170623_194348_resized.jpg
20170623_194356_resized.jpg
20170623_194411_resized.jpg
 
  • Like
  • Winner
Reactions: 10 users
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor