I have a new GM flex hose to connect this to the air cleaner. I cut the snout off a factory air cleaner and will weld on a 4" oval section of exhaust pipe. My air cleaners original snout tapered.
HAFRODs 78 Aeroback Salon build
- Thread starter HAFROD
- Start date
- Status
Started to install my redneck wood grained panels. Hard to photograph with the glare off the clear. I really dig it, how bout you guys?
I like it alot! Honestly, i love the whole build, it's friggin AWESOME!!!!
Is that a vinyl overlay?
It's paint. Check the very first page of this build thread near the bottom.
Lots of small loose ends to do. Some are really quick and easy, others are a few hours. Sat down and made a list. I broke it down into quick/easy stuff that I'll try to knock out when I get home from work tomorrow and Thursday. The longer to do's will be Friday, Saturday, Sunday, and Monday when I'm off. I may actually drive the car around my neighborhood Monday afternoon. This is weather permitting.
Is the duct on your cold air intake (the part that the flex hose attaches to) from another air cleaner? What is the part with all the holes in it, that's in the lower photo?
Hey, HAFROD. If you want a good chuckle go back and read the first couple pages of your thread. Funny how these simple builds snowball, isn't it?
The air inlet is from an S-10 I think. The bottom pic is of my drivers side core support without the header bolted on. I hole sawed some holes for a bit more air for the inlet.
- Status
