New member, First time gbody owner.

Status
Not open for further replies.

Turbo Zach

Comic Book Super Hero
Sep 8, 2015
2,534
5,874
113
50130
It all depends. Did the turbo seal go out or intake impeller? It is a turbo engine so a little more than a naturally asperated engine. Unless it is a 78 or 79, then probably a boat anchor.
 

Turbo Zach

Comic Book Super Hero
Sep 8, 2015
2,534
5,874
113
50130
The early years have a different head and intake than the 80-84, and will not interchang. Not worth much, couple hundred bucks maybe.
 

ck80

Moderator
Moderator
Supporting Member
Feb 18, 2014
5,744
9,120
113
Got the engine pulled today. Any idea what this engine trans is worth? Turbo is blown. But have all the pieces that came with the car. Can't say that's complete but looks to be mostly there

Engine may be of interest to jeep guys for an offroading machine. Probably your best bet.

Trans... Probably not so much use, keep it for a core depending if it's a th350, or scrap if it's a th200c....

As an aside, if/when you get to the point I may be interested in trading you something (s) for either the complete air intake (bonnet, tube, airbox), the small control box and harness that would've bolted on the fan shroud, and the factory rims... depending on condition.

I keep trying to quit hoarding and accumulating, but, those are the types of things id still probable wind up doing something with. Then again, would have to mail back and forth between georgia too...
 

ed1948

Royal Smart Person
Aug 6, 2016
1,286
1,613
113
Quinte West, Ontario
Welcome to the forum.. I'll be checking in from time to time to see your progress.
 

street sweeper

Greasemonkey
Jun 12, 2017
204
264
63
Central Indiana
U\
Engine may be of interest to jeep guys for an offroading machine. Probably your best bet.

Trans... Probably not so much use, keep it for a core depending if it's a th350, or scrap if it's a th200c....

As an aside, if/when you get to the point I may be interested in trading you something (s) for either the complete air intake (bonnet, tube, airbox), the small control box and harness that would've bolted on the fan shroud, and the factory rims... depending on condition.

I keep trying to quit hoarding and accumulating, but, those are the types of things id still probable wind up doing something with. Then again, would have to mail back and forth between georgia too...
Send me a PM, I have the intake setup, not in great shape but I have it, the box as well.
 

street sweeper

Greasemonkey
Jun 12, 2017
204
264
63
Central Indiana
The early years have a different head and intake than the 80-84, and will not interchang. Not worth much, couple hundred bucks maybe.
Well I appreciate the information. I could not find this info and was slightly curious. Glad I didnt decide to persue building this engine since its not interchangeable.
 

street sweeper

Greasemonkey
Jun 12, 2017
204
264
63
Central Indiana
0803171717_zps2nlikc0p.jpg

After 8 hours in a u-pull it yard my buddy and we were able to get this out of an 05 Tahoe. We had it 95% ready at 3 hours but we could not get the engine mounts unbolted from the frame or the trans to separate from the engine, 2005 tahoe with a frame in worse shape than my 79 regal :eek::wtf:. So we had to unbolt the mounts from the block and pull the engine and trans together. Which was not exactly fun on a 4x4 truck.

0803171900_zpsoencb2tf.jpg


also cleaned out the junk that was in my trunk since purchasing the car.

will probably also start a build thread soon, now that i have another engine, the original drivetrain pulled and a few other things done to the car
 
  • Like
Reactions: 1 users
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor