What did you do to your G-Body today? [2011-2018]

383_GrandPrix said:

I've been looking around for steel braided lines for my blazer rear disc swap, and found that Rockauto is the cheepest by far; It's only $50 canadian for the two lines. Thing is they don't have any listed for our cars, but the camaro uses the same 10mm banjo fiting as our cars do.
https://www.rockauto.com/en/catalog...1361450,brake+&+wheel+hub,hydraulic+hose,1792

Click to expand...

neat

MrSony said:

neat

Click to expand...

I read your post about the GPS drag racer app, I have never heard of that app so I downloaded it to my phone and I'll let you know how my Jeep does. I bet my time will make you feel real good about yours...

Got my dash bezel for the bonneville all wrapped up. The wood grain had to go. At first I was thinking turn motor, then brushed silver and finally put this on..What do you guys think? timo22

timo22 said:

View attachment 80167 View attachment 80168 Got my dash bezel for the bonneville all wrapped up. The wood grain had to go. At first I was thinking turn motor, then brushed silver and finally put this on..What do you guys think? timo22

Click to expand...

Tim, I think it looks sweet! I am a fan of carbon fiber though, so my opinions are somewhat skewed lol....

Injectedcutty said:

Tim, I think it looks sweet! I am a fan of carbon fiber though, so my opinions are somewhat skewed lol.... View attachment 80169

Click to expand...

How ironic. I was just looking into CF and epoxy - got a recommended source?

timo22 said:

View attachment 80167 View attachment 80168 Got my dash bezel for the bonneville all wrapped up. The wood grain had to go. At first I was thinking turn motor, then brushed silver and finally put this on..What do you guys think? timo22

Click to expand...

Very nice.

timo22 said:

View attachment 80167 View attachment 80168 Got my dash bezel for the bonneville all wrapped up. The wood grain had to go. At first I was thinking turn motor, then brushed silver and finally put this on..What do you guys think? timo22

Click to expand...

That looks awesome Tim! How did you cut the material to fit? Did you make patterns?

motorheadmike said:

How ironic. I was just looking into CF and epoxy - got a recommended source?

Click to expand...

Not sure Mike. I got a sheet of real CF off ebay years ago that had the UV resistant clearcoat, and adhesive backing. I don't recall the source, but will need more soon as I'm almost out of it.
There is a company called dragonplate that has some options, and a composite company that sells all the stuff to DIY. If I can find their site I'll PM you.

Got me a few LED's delivered today for rear lighting. I still need to get some turn/brake bulbs, but those get installed after the taillight housings are bolted on.

WAYNE WORCESTER said:

Added tint to the windows of my 1980 Malibu View attachment 79661

Click to expand...

gorgeous