What did you do to your G-Body today? [2011-2018]
- Thread starter dlo253
- Start date
- Status
I installed the sway bar brackets, the 1 3/8" bushing has a gap of about 1/6" with a 36 mm sway bar. I hope it will close up after I get the GP on the road. If it doesn't I'll be looking for bushings that fit the sway bar properly. I got the oil catch can installed but I have to find 3/8" vacuum line, the guys at the part stores tries to sell me fuel line and even after I explain to them that fuel lines are made to deal with pressure and can collapse if used for a vacuum line and a vacuum line is made so it will not collapse they have that look of confuaion on their faces. I worked on my DRL lights, the right side works fine but the left side doesn't come on. The parking lights and signal works on both sides. Each side used 2 relays, diodes and a capacitor so after testing everything it looks like one of the relays is the issue....chinese junk.
My 14 year-old alternator failed requiring a jump-start at a gas station from an upstanding citizen who happened to be driving a Mustang.
The best part was his mistaking the Tuned Port intake for a supercharger.
The best part was his mistaking the Tuned Port intake for a supercharger.
Hey, Riverhead isn't all that far from Yaphank were all the Nazis actually were.....
Flushed the cooling system out, new thermostat and changed all the hoses
Removed the non functioning smog pump, hoses and brackets
Removed the non functioning smog pump, hoses and brackets
This thread depresses me because mine's almost "done". I'll be posting a 10,000 mile update in my build thread soon.
Haha, that happened several times when I was running the Holley Stealth Ram setup in the pic below. It whistled like crazy and one guy at a show argued with me about it being boosted lol!!!!
Finished my heater install and wrote the tech story for those who were asking.
https://gbodyforum.com/threads/heat-and-defrost-unit-from-vintage-air-install.69539/
https://gbodyforum.com/threads/heat-and-defrost-unit-from-vintage-air-install.69539/
- Status
Similar threads
