Search results

  1. Regal Beagle

    Time for Voting on October G-body of the month!!!

    I would agree that a poll would be much quicker and easier and everyone can see the results for themselves. JMO!!!
  2. Regal Beagle

    2011 GBF Calendar Call for Photos

    Sorry, didn't see the first post. Pis sent to your email as requested. Beagle :mrgreen:
  3. Regal Beagle

    2011 GBF Calendar Call for Photos

    Here's mine!!!
  4. Regal Beagle

    Any Volunteers for GBotM?

    Lokks like we're off to a bang up start here again!!!
  5. Regal Beagle

    Any Volunteers for GBotM?

    Well then let's get 'er done!!!
  6. Regal Beagle

    Help with header install

    I would say it's highly likely he has solved his problem since the initial thread was sarted over 2 and a half years ago. LOL!!! But you never know. Beagle :rofl:
  7. Regal Beagle

    best spark plug

    Autolite 3926 in my 355 sbc or AC Delco 41-629. Both seem to work just fine and they are cheap!!! Beagle :mrgreen:
  8. Regal Beagle

    B&M Console Mega Shifter

    The B&M website has downloadable instructions with very good detail. I was just more curious about the amount of cutting that would be needed because the shifter is really designed for F-Cars. Beagle
  9. Regal Beagle

    B&M Console Mega Shifter

    The B&M website has downloadable instructions with very good detail. I was just more curious about the amount of cutting that would be needed because the shifter is really designed for F-Cars. Beagle
  10. Regal Beagle

    B&M Console Mega Shifter

    Thats a nice clean install!!! Looks great. Do you like the shifter?
  11. Regal Beagle

    B&M Console Mega Shifter

    They are 17X8 Torque Thrust II's. Do ya like 'em? :D
  12. Regal Beagle

    B&M Console Mega Shifter

    Has anyone installed a B&M Console Mega Shifter in their G - Body and have some pics of the finished product? How much cutting was involved and how difficult was the install? Beagle :D
  13. Regal Beagle

    Original front springs cutting , how much ?

    JMO, but I would not waste my time playing around cutting springs. For the cost of a new set of springs that will lower your car it will be a lot less headaches particularly if you are cutting old spring which likely need replacing anyway. JMO!!! :D
  14. Regal Beagle

    TV cable bracket

    SOunds like you got this issue resolved but for anyone else looking for a trick TV setup for a 200-R4 you should check out Bowtie Overdrives. www.bowtieoverdrives.com They have a really nice set up that works with specific carbs be it Edelbrock or Holley. I have also found Phoenix Transmission...
  15. Regal Beagle

    Ride Height & Coil Springs

    I am running 255 45 17's front and back without issue. With those S10 springs my car sits perfectly level and rides very nice. Corners well and does not have a harsh feel even on rough roads.
  16. Regal Beagle

    Ride Height & Coil Springs

    I just went through what you are going through and with much trial and error was able to determine that, at least on my setup, that the 5662 increased my ride height by about 1.5 inches above the stock springs. I ended up going with the Moog 5658's. The ride height is just perfect and the ride...
  17. Regal Beagle

    200r4 to Holley carb tv cable bracket

    Try Phoenix Transmission. They have the throttle cable linkage you need to make it work with the Holley. http://www.phoenixtrans.com/html/tvcablekits.html
  18. Regal Beagle

    Seat Belt Retractors

    Wondering if anyone knows of a source for new or used seat belt tensioners/retractors. My 85 Regal needs a couple of new ones. Any direstion would be greatly appreciated.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor