'87 Monte SS Q-Jet carb, #17087129, reconditioned, primary throttle plate shaft rebushed by AED, new electric choke element and vacuum break. $250 plus ship. Thanks for looking.
Hi Everyone, the Monte SS was sold and now going to post parts that were gathered for a restoration that will never happen. Over 10 years ago purchased a new in the box GM front bumper cover. $1,500 . I'm in central Jersey and would prefer to not ship it. I may be heading to Spring Carlisle, so...
Thanks for the reponse. Was orginally a peg leg rear with the gears as you mentioned. When the gears were changed during the switched to a posi unit along with an aluminum cover.
It has the rebuild MC/SS 200 4r that has a Transgo kit . 3.42 gears w/posi. Located in Central Jersey. Thanks for looking. Hi all, lowered price to $10,000
This black/tan interior with bench seat '87 Monte SS has been in the family for the past 20 years. It was my daughter's, so it was kept it up mechanically, in order be safe for her use. It has a 350/330 crate mtr GM part # 12486041, but replaced the flat tappet cam with a Crane Compucam 2031 so...
It has already been mentioned that the single wire O2 sensor will not get hot enough because the headers don't retain heat like the cast iron manifolds so the computer cycles back and forth between open and closed loop or stays in a limp home mode. A heated sensor needs to be installed. I've...
Thanks for the response, based on your mention of a rear bumper now being available, checked OPGI and for model yrs '78-'83 the pic shows the El Camino/ Malibu wagon bumper. The listing states for "El Camino/ Malibu", but they are referring to Malibu wagon. Noticed the front bumper going for...
No aftermarket rear bumpers available for Malibu, so had a core rechromed. Did not install yet as I was going to wait until I do the body mount replacement thing. Planned on getting a front bumper rechromed as well as was told the fit is not good with the aftermarket?
Yours went on okay and...
I'm also battling a passenger side water leak, and it's traced to a leaking seal left side of the HVAC box. Traced it by pulling the carpet back along with removing the glove compartment door during a heavy rain. Plan on using a urethane sealer along the side of the box as what's used for...
Water leaks as a result of the HVAC box to firewall gasket getting old have been mentioned but I've experienced with my now 40 yr old Malibu, other firewall related water leaks. With age, the seam sealer in the cowl area starts to crack resulting interior water leaks. Aged/cracked sealer...
My lowered ''79 Malibu also has 235's BFG/TAs. The Corvette rallies they are mounted to have a 4 inch backspace. There is slight rubbing at full wheel lock. It's tolerable.
I'm using S-10 springs, but it been awhile and don't have the Moog # number on-hand, not to say that you would use the...
Probably what was already mentioned about a low electrolyte level. Suppose it would not hurt to check out the alternator output for a overcharge condition.
Happened to my '87 GP during the drive to work. Started smelling battery acid, opened the hood, the top of the battery had blow off.
I would have the odometer refer to the actual mileage , but keep a log of what is going, i.e @ 95k miles, swap mtr/trans, etc, along with the routine maintenance.
Reaching out to El Camino/Caballero community on those who took the plunge and an brought aftermarket front bumper. Heard that there are fit problem?
Thanks for any responses.
Tony
Looking to upgrade bumpers, The rear bumper is in the chrome shop as was not able to find any aftermarket. Heard there are fit problems with aftermarket Chinese frt bumpers, so reaching out to for any feedback, from those who took the plunge? Thanks for any responses.
Tony
Looking to replace body mounts on the G bodies in the family, Going with factory style rubber body mounts. Doing a Google search, notice the kit that Kirban sells go for $250 while those available from Monte Mikes or Dixie are going for $100 cheaper. The question is has anyone gone with either...
Have Corvette Rallies, that have a 4 inch back spacing along with BFG T/A's 235-60's on the '79 Malibu. On full lock turns, there is some interference, but no big deal. I've had 275-60's out back with np.
Checking back in to say that it was not a rear brake problem after all, but a seized right side caliper. It would brake straight during normal braking situations, but with panic stopping the Malibu would want to do a 180 clockwise, which really does not make sense as the left side caliper is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.