Search results

  1. khan0165

    Brakes - Rear Drums, won't bleed

    nice to see the old crew still around, site has changed a lot tho. The e-brake has been eliminated. Just not understanding why bleeder squirts, but no pressure drop at the pedal. Yes, I watched that Firebird video too, not sure I understand the exhaust adaptor. I figured I could just use a...
  2. khan0165

    Brakes - Rear Drums, won't bleed

    Prop valve is out now, no sense in revisiting it... I have pressure all the way back to the wheel cylinders. How do I determine if the wheel cylinder is clogged inside. Are there any videos that show handy tricks on how to remove and reinstall the wheel cylinder clip/clamp?
  3. khan0165

    Brakes - Rear Drums, won't bleed

    Haven't posted in a few years, car's been in storage. Problem initially started with a leak, I eliminated the leak, then began bleeding the brakes and noticed the rears are not engaging, and have gone unnoticed for quite some time. Reset the rear shoes, tried bleeding again, no bleeding from the...
  4. khan0165

    Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE TRACK

    Re: Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE T n_-X83qa-6E ydpBb6w2y7A
  5. khan0165

    Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE TRACK

    Re: Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE T thanks, it's not that quick, it just launches hard. I think your GN will keep up it's been a pretty slow year; cleaned up some stuff from last year's build, got the new tires to fit, bought new 26" slicks, few other things here &...
  6. khan0165

    Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE TRACK

    Re: Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE T chance to take advantage of the cold, made it out 1 more time this year. November Winter, -10*C in the morning, warmed up to about -5*C during the day. driving to Montreal tow the Corvette, drive the Fast car why are we pulled...
  7. khan0165

    Wheel Fitment Guide

    I think for a stock look, keep 15x7s all around the 8s give a deep dish look, and the 6s will be too narrow to use a stock size tire on a 15x7 rim, you can use a range of sizes, anywhere from 195 to 255 comfortably. The 255s don't look as drastic in the rear as my 275s here's a picture of...
  8. khan0165

    Wheel Fitment Guide

    generally with these cars, 4" back spacing is a safe bet the build quality is questionable, and some cars are comfortable with more BS, and others with less BS it also depends on the type of tire you chose. A large sidewall tire will tend to bulge out more than a low-profile type tire. for...
  9. khan0165

    Pit from Belgium

    Hi Pit, welcome to the forum it's nice to have you on board I want to tell you about our "G-Body of the Month" program. Every month, we pick a theme, and G-bodies that fit that theme can be nominated to win GBOTM! You get your car's photo up on the main page, and bragging rights :wink: , and at...
  10. khan0165

    Paint headers question

    after some experimenting, I guess my conclusion is; you just can't beat the factory paint quality at a reasonable price. At the manufacturing process, they are chemical dipped to remove all grease and residue, and then electrically painted, the paint bonds well and hold's it's age. I've heard...
  11. khan0165

    Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE TRACK

    Re: Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE T drrr, thanks very much!
  12. khan0165

    GBOTM: November '13 Entries Thread

    this is awesome! oilman666, welcome to the forum! Nice Cutlass, VERY clean! CruizinKev, nice to see your car here! keep them coming guys! Lets so show our support for our international family!
  13. khan0165

    Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE TRACK

    Re: Khan's Motoring Chronicles - PICTURES & VIDEO FROM THE T some pictures & videos from this past weekend been facing some electrical issues, but finally made it out did not run too good, ET was average, mph wasn't too good, no real improvement from the 4.11s best 60ft ever though, 1.707...
  14. khan0165

    GBOTM: November '13 Entries Thread

    this is awesome! Cyrus, thanks for adding! okay, so this month is looking a little thin. So to show my support, I went through and dug up some international members here's some... - CruizinKev (Germany) - DI_Knight (Mexico) - Osantisbon (Mexico) - PGLM (Finland) - Finn80CalaisSBC (Finland) -...
  15. khan0165

    new and need help finding a frame in ontario canada

    a friend of ours is using thar tpi setup on his 350 which has trickflow heads. In stock form, his tpi is not keeping up with the heads and the rest of the engine combo what kind of modifications work with your setup? Larger throttle body? what pound injectors? very cool! 8) thanks for the...
  16. khan0165

    GBOTM: Congratulations to procircuit our October '13 Winner!

    Re: GBOTM: Congratulations to procircuit our October '13 Win been following your build quality and efficiency of work is super impressive! Love the truck you have as well 8) congrats on the win!
  17. khan0165

    new and need help finding a frame in ontario canada

    hey, welcome to the board, I'm from Ottawa I'm learning now it doesn't take much to start twisting these frames you should post some pictures of your build good luck in your search!

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor