Search results

Here’s the plugs I’m referring too

Ok I replaced switch and same deal. So I took radio out, glove compartment, and under dash panel So I have a clear sight of the wires. I’m getting power through a brown wire that plugs into the switch. I have power in and power out. The green wire in the plug that plugs into the switch is not...

Wow Thank you very much!! I almost went out looking for the wrong switch. Thank you Heading out now to see if my little town has this on the shelf by chance

This should be what I need AC Delco 15-71352 Correct?

That’s her. The first pic I posted up was for vacuum, I made a mistake Should’ve been the electrical connector (orange) in your pic. I suspect that part will get me power to the compressor

This what I need?

Is this what I need? https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F372117083494

Wait you said mode selector switch Would you have a part number for the switch? I won’t have to get the whole controller?

Cool I found two controllers on eBay if I can’t repair mine. Would you happen to have one laying around by chance?

Judging by this I need a controller My green wire has nothing My brown/white wire has power, but not the green

The light green wire is see is coming directly out of the controller into a plug behind glov3 compartment, then travels up straight to low pressure switch plug. Is that supposed to have power when selecting AC from the controller? If yes, I need a controller, if no then which wire sends power...

Boy I screwed that all up. The first pic is the bypass plug I believe it’s called, I have power there, I believe that comes from the fuse box under the dash. If the controller is supposed to send power to the low pressure switch through that light green wire. Then that would be my issue, since...

This is plug behind glove compartment

OK I traced the light green wire from the low pressure switch to behind the glove compartment to a plug. I have continuity between switch and the plug. I have no power. I pulled controller out a lil and looked at wires behind it. Look ok. I put controller on AC max, key on . No power from...

Hey all I’ve been looking for my problem in the search menu, I’m not seeing my problem, if this has been answered and I missed it, I apologize. Here’s my issue. Compressor won’t engage, I noticed it wasn’t working, so I traced wires and found the wires coming from the compressor had been...

I'm thinking because he used some random spring for my governor That has to be the issue, I think I'm goin to order the GN spring along with the different shift kit, and see how that goes. I'm also thinking of just dropping it off to Janice Transmissions and have him fix the problem. Local...

They had me hold it wide open, and made sure it was tight. That was it

hello all I have 85 442 Trans was done, TransGo shift kit, Super Servo, TCI breakaway Converter, sits behind an olds 355 and 4.10's in the rear on a 255/60/15 tires. Here's my issue The trans shifted okay at first, not as great as my GN with a CPT HiTech shift kit, but ok. Well one day it...