Search results

I have heavy duty double lock with a rigging chain wrapped around the rear axle anchored to a heavy-duty rigging eye hook that's custom made that's weld to a 2" steel rod T cemented in my garage floor. It's like a really big boat anchor holding the car in place, Plus pray I don't come out of my...

I have a 1987 Buick Regal Limited V6 231 na-(2barrel carb). When I apply the brake the rpm drop and when you release the brake the rpm goes back. The power booster has been changed and so has the check valve and the brake booster hose. I have checked for any vacuum leaks and not one to be found...

I haven't swap the ccc distributor to vacuum advance distributor. Someone gave me a used proform hei vacuum advance even fire distributor to replace the even fire ccc distributor. The distributor didn't cost me a dime, but someone told me it wont work and I heard it will work. What is your...

I have a 1987 Buick 231 V6 non/computer carb or turbo. I notice that when I apply the brakes hard the car wants to stall. It' feels like the vacuum in the carb gets robbed and that's why it wants to stall out. I was wondering if there's a constant vacuum on the manifold that I could hook the...

Thanks for the offer, but I just got the distributor. I don't know if there's any difference between computers for a V8 or V6, I forgot to mention I have a 231 V6.

I have an '87 buick regal 231 v6 and it was time for a carburetor, so I order one. Next morning get in the car and notice glove box open, then notice the lock is up. I get out check the car, all the locks are fine no makes on window rubber. So my fault for leaving the door unlock. I start the...

I just got new front tires mounted and balanced, '87 buick regal. I'm now looking to get a wheel alignment because the place I got the tires from told me, they don't do alignments on older cars. So I'm in need of an alignment and I'm located in farmingdale, new york, if anyone knows of someone...

https://riverheadnewsreview.timesreview.com/2021/05/105072/two-day-drag-racing-event-at-epcal-approved/?fbclid=IwAR38o6mP4q7QdujKceYIBo4SyHVS1w0z5KkXv9ZebhhB3PFdpprIrOiqz0Y

I found a set of bucket seats and they fit '82-'92 camaro/ fiebird. Will these seats fit my '87 buick regal? If they do fit, will they bolt right up the my seat tracks, I have split bench in the car now. Thanks for the time and help, Rob

Well my '87 buick regal limited, it's coming to that time to swap the v6(or rebuild it) or swaping to a v8. I have a bad engine knock v6 and being a car guy, it doesn't sound good at all. I was thinking of having the 231 v6 rebuilt and putting goodies into it. Or then there's the other route by...

I installed an astro steering shaft today and the steering is so much tighter. I have a question about the steering pump, it makes noise now. When I make a turn, I can hear noise from the steering pump. It sounds like air rushing in though the steering column when I turn left or right. I open...

Good Day, I have called and emailed moog about rear coil springs 5391 and no answer. Maybe someone can answer the question for me. I'm wondering if 5391 rear coil springs will fit my '87 buick regal limited? I just put kyb excel-g . The front ride height is good, but the rear ride height...

I'm looking to raise the rear ride height 1" or 2" on my '87 buick regal limited. I just installed front and rear kyb excel-g, rear tire 255/60/15, front 225/60/15. I'd like to know if moog rear coil springs 5391 fit my car.

I just bought front and rear KYB Excel G's for my '87 buick regal and what a big difference they made in the ride.

Sorry for getting back late to your question, been working doubles. The answer is yes, and there is power.

So I think the problem is in the steering column. Here's the problem I'm dealing with my 1987 Buick regal. If I turn on the heading light switch I have all lights, tail lights, rev and brake lights work and so does the turn signals and no headlights. But if I turn on the hi beam switch, all the...

How can I tell between and even or odd fire on a 1987 buick regal limited 3.8 231 V6 non turbo motor? Thanks for the help and information

I want to thank every one for the information on helping with this problem.. Well like the saying goes, I opened a can of worms. I took the steering column apart. I think I'm just better off at this point to replace the whole column. It needs to be rebuilt on top of replacing the turn signal...

Thanks for the information.