Hi !!
I have a problem with my blinkers ! When I activate them, they light up, but solid light, they don't blink. Even the light of the blinker on the instrument cluster goes solid ! what should I change ?
And sometimes they blink I don't know why.. !
Thanks for your help !
Mickeypowa
Hi guys !
Finally I found another way : I connected the wiper motor directly to the battery with a fuse and a switch on the dash.
Now I can make them work by clicking this switch and then actionning the original switch on the dash.
I don't have delay wiper anymore, but it work great, and I can...
Hello!!
So I asked mike montes but he told me he hasnt circuit board anymore !!
If I put power directly to the motor, it works, perhaps I could put a switch to connect the motor to battery directly ? Do you think it should work?
Thanks!
Hi!
Yes you are right its probably the circuit board ! But what do you recommand? We cant find these anymore...
I've seen this en rockauto : the return and rebuild. Do you think if I send the motor they would repair the board ?
Thanks
Mickey
Hi guys!
I changed the relay but the motor is still not working.
What else can I do ?
Should I order a motor without the delay option ? Would it work ??
Thanks
Mickey
Hi!!
Ok I got what you said !! I transfered the board, it was pretty easy!
But it still doesnt work!! I have power because the washer pump works!
I noticed the green relay on the board was burnt !! Maybe it is the reason why it doesnt work!!
I'm going to buy a new relay, it worth 10 dollars...
Hi guys!!
My wiper motor stopped working. It was working intermittently for few months. I had a delay motor (green wire) with the integrated pump.
The old one :
I bought a new one from rockauto, connected it with the 3 pins connector but it doesnt work.
When I activate the switch, I can hear...
Hi guys !!
Some new of my car :
I finally received the starter and now it drives well again!! I need to find the exact front bumper for oldsmobile cutlass supreme 1980 with the turn signals in it because mine is a 1979 with no signals!!
Here is a video :
I have 2 questions :
- my right hand...
I finally ordered the gasoline starter, I should receive it on may the 12th ! Hope It will make it with the coronavirus problems! I tipped the reference of the starter I had previously and it was used in gasoline cars so it should be ok !
Actually when I bought the car I was told that it was a diesel cutlass at first. On the dash I have a little logo "diesel" and on the hood I had a diesel logo standing up no the usual oldsmobile logo.
So my car was a cutlass supreme 1980 brougham v8 350 diesel.
But I was also told that the...
I just checked on my block : its written
On the top of the block, near fill tube : 395558 2
On the left head : cfd 409 147
On the oil fill tube : 6337221
When I check on internet it tells me a 350 olds in 71 cutlass !? With a 1970 engine !
Hi guys!
I tried all the positions and it doesn't fit ! I already managed to resale it !
So i'm now considering ordering a new starter from rockauto.
But I have a question : my oldsmobile was originally a v8 diesel, but the engine has been converted into gasoline burner with a carburetor few...
Yes I tried with the solenoid up and with the solenoid down. I see only theses 2 positions. as the solenoid is not oriented on the good side on this model I think I won't be able to make it fit.
I will try to compare the 2 solenoids 1m1027 and 1m1028, the one that the seller has seems to be...
Finally the solenoid was not exactly the same so I decided to buy the mini starter!
But I dont get how to put it to make it fit...?!
I have the reference sum-829105 from summit racing, is it compatible with oldsmobile?
I tried with solenoid up, but it hits the block, with solenoid down it hits...
Hi guys!!
I tested the solenoid like you said but I get 0V going to the motor so I guess it's dead !
I have good news :
I found theses parts available here :
A solenoid : it looks pretty similar
Or a starter for chevy 350
Or a high torque mini starter, is it this one compatible with...
Ok thanks I will check that but seems ok for firewall and doors!
I bypassed the solenoid, at first it didnt work, but I tap on the motor at the same time and now the motor spin!!
But when I connect solenoid it still only engages, no spin!
So what can it be ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.