What’s going on fellas? So after the valve job I thought I was all done with this engine. Seems like #1 still isn’t firing. It's now building compression (120psi) and the engine is running a whole lot better, but I just can’t seem to fine tune it.
I am also running rich (some black smoke at...
If i wanted put these vette wheels on my 81 elco, which size adapters/spacers & tire size would i need?
Guy has 19s all around his monte, but the sets I've found for sale are 18s in front and 19s in rear.
Thanks fellas.
Can any of you fellas tell me how i can hook this up outside of the cluster? Trying to wire it temporarily under the hood while i time and tune my engine. Thanks fellas.
Edelbrock 1405 Carburetor
So i rebuilt my carb for no apparent reason. Just because it was 10yrs old and very dirty. Thought rebuilding it would finish fine tuning my idle. So i used new gaskets, needles, and floaters. Everything else I re used.
My original floaters were nowhere near 7/16 -...
trying to find the right size exhaust valve for my head with cast # 14101081
summit has two different ones. same valve diameter, but different stem diameter.
any of you guys know which is the one I need? thanks fellas.
Been having this elcamino for about 2 years but i never went in depth with it why i ran like crap. Popping out the carb at high speeds. So recently i made time to look at it (blame it on the covid19)
Went around pulling plugs 1 by 1 to see if they would all make the engine bog down. #1 and #7...
I want to temporary hook up my factory tach under the hood while i tune my carb. Which wires go where from the back of the tach? I have the tach filter on my firewall going to my distributor.
so back when i had this problem i searched the innerwebs and i got some info but nothing clear. found my problem, fixed it and recorded video of it. hopefully it will help someone as rainy season is in. thanks n God bess ya'll (if this thread is in the wrong section can an admin please move it)
1981 Chevrolet El Camino 5.0L TH350
Let me start from the very beginning. i had issues with my turn signal lever not locking into
place, so I replaced the turn signal switch. After putting everything back together i noticed that
my left blinker indicator was staying lit on my dash so i figured...
Ok so changing out my turn signal cam went good and I ran into another problem that I didn't know was there.
My front turn signals work but my rear don't.
This is what happened at first:
Both front turn signals were working fine, and only rear passenger was working.
Changed out my rear driver...
Having a misfire with my Elco. I have a 305 with a edelbrock carb and intake setup. Removed the intake and valve covers to clean all the gunk and old oil from valley and valves. Pushrods and rocker arms. Put everything back together and this is what is happening. You can't really hear much in...
i have a 1981 el camino and i want to swap the panel for a 78. do i also need to swap the core support or can i use my 81core support with the 78 panel?
same question if i find a 82 header panel, do i need a 82 core support along with the 82 panel or can i use the 81 core support with the 82...
how do i take the mirror apart from the cord? i need to pull the cord out of the base and i dont want to clip it because someone might need it. thanks.
Anybody replaced the bullet mirrors with the sport mirrors? (81elky) I pulled some off a Caprice but after looking inside my door it looks like there's a plaque that's not gonna allow the length of the mirror studs to clear. Right where the sport mirror is supposed to be mounted (closer to front...
I have a couple questions about my El Camino. I don't believe the truck and the VIN plate are a match. I googled the VIN and it shows it was originally a v6. The truck has a 305 / th350. The dash has a super sport emblem which I know could of been added after but still. It has power windows and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.