Search results

  1. Bri guy

    Carburetor

    Check plugs/wires or disty cap for corrosion. Mark the cap for the position.
  2. Bri guy

    2004r auto shifter recomendations

    Did the trans cable need adjusted when you put the b&m on Got it from summit racing?
  3. Bri guy

    2004r auto shifter recomendations

    Did the trans cable need adjusted when you put the b&m on
  4. Bri guy

    2004r auto shifter recomendations

    My stock shifter is pretty sloppy when shifting. Skip a gear if im not careful. So what is out there thats pretty close to plug and play so when i get on it, i wont make a mistake and break anything? Will be adding a shift kit soon
  5. Bri guy

    Random interior questions

    Sweet. Thanks for the info. I was thinking of using seats from a modern car. Between the current seats and the other original ones, theres always something trying to poke thru the fabric or stabs your *ss. Would rather have something else in it and save the original seats before they rip/get holes.
  6. Bri guy

    Random interior questions

    They dont retract. Found that out while slowing down for a speed trap😂 but was thinking maybe newer seatbelts from a junkyard.
  7. Bri guy

    Random interior questions

    1) seat belts. Mine quit working properly. Can i use any seat belt from any car? 2) back seat. Anyone know the size of bolts needed to mount it? 3) bucket seats. What seat can i use that needs minimum modifiactions to fit? I have 1 set of buckets with manual tracks and 1 set of motorized...
  8. Bri guy

    Seat question: re 2002 Grand Prix bucket seats.

    The back seat fits too? Is it fairly easy to swap the tracks and make it fit?
  9. Bri guy

    Seat question: re 2002 Grand Prix bucket seats.

    What car did these come out of?
  10. Bri guy

    Headers Question

    What set of headers would fit in a 1986 Brougham with a 403 (sb like 307) without getting beat into fitting. Dont need anything fancy, almost anything is better than whats on there. Mine looks like they have been patched and beat to fit.
  11. Bri guy

    Steering column repair questions

    I got the bearings in. Just working on the putting the column back together.........which sucks.
  12. Bri guy

    Steering column repair questions

    Alright. Made some progress. Pulled the column out to work on it. Stuck the bearings in the freezer. They went in way easier. Seems like they cant go in any farther. Does these pics look right?
  13. Bri guy

    Steering column repair questions

    Just got back from vacation and back at this column. Ive heard putting the bearings in the freezer for an hour might make them shrink enough to sit in easier. What if i seperate the bearings and that plastic piece and then tap the bearing in with a socket or flat punch? Then put the plastic...
  14. Bri guy

    Anyone ever try this column?

    ..........was hoping it was direct fit. Good eye on the key tumbler. Probly not worth my time and money then
  15. Bri guy

    Anyone ever try this column?

    https://www.summitracing.com/parts/hli-10020?seid=srese1&gclid=Cj0KCQjwg8n5BRCdARIsALxKb97bHmL-_dOxYPmGhUszUooN3IYq7NSEEqnXUdTlEinQMvuRLhkGfk8aApN6EALw_wcB
  16. Bri guy

    Steering column repair questions

    Anyone ever cut ALL these wires and then spliced them together? Having a hard time getting the bearing in with all that sh*t in the way
  17. Bri guy

    Steering column repair questions

    I would assume the bearing would sit flat in the "holder" and that plastic would be facing out...
  18. Bri guy

    Steering column repair questions

    What side goes into the column...
  19. Bri guy

    Steering column repair questions

    I had to use a small punch to knock them out. But want to make sure the new ones are correctly installed. Top and bottom are slightly different. And i dont know which way they should face
  20. Bri guy

    Steering column repair questions

    There was no way to do that with mine. Bearings everywhere. Plus i had the kit to replace them. Might as well do it

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor