Search results

As aggravating as this was, if there is a clerance problem , we may have some custom work on the hood, LOL

So what I figured out was I didn’t need the smaller pulley after all. I will not assume in the future just from reading , lol. Smaller pulley would not press on any further and after studying it a bit , I just couldn’t see the larger pulley hitting the steering box. Installed a new truck pulley...

putting my 80 elco back together and cant find the height of the core support from the frame. Anybody have one they could measure for me ?

Truck

doing a 5.3 ls swap in my 80 elco. Just replaced the power steering pulley with the smaller one to avoid hitting the gearbox. pulley flush with end of shaft but needs to go back about 3/8 more to line up with other pulleys. Whats the fix for this problem? will the pulley go further on? I know...

mid 90,s s10 or truck ac bracket, 4.3, 5.7

Who has used a mid 90,s sbc ac bracket for their 5.3 swap. Have seen a little on it but need more info. Search is coming up blank for me. 80 elco.

is that the s10 header or g body. Also does your passenger rear coil hit the air box ? Real close to sitting my 5.3 in the 80 Elco.

what headers are you using ?

That's the pic I was looking for.lol Thanks. The rest I understand. Now to find that piece and the equalizer.

LOL, I found that yesterday but it still don't show the front ,rear cable connection.

I,m definatly missing that bracket but seems another that connects the front to rear cable.

apparently the floating bracket and the connection for front to rear cable. Pics would be a great help. I have searched everywhere around here and cant find any pieces laying around or remember taking them off, although I know I did,lol. I found the old cables, no brackets in sight.

Nobody?

Does anybody have or can get me pics of the routing for the ebrake cables. Trying to get my chassis buttoned up and forgot to take pics. Cant seem to find much online. Feel like im missing a part or two.

Does anybody have or can get me pics of the ebrake cable routing, 1980 el camino. Trying to button up my chassis . Got all new parts and forgot to take pics before tearing it apart. Thanks for any help.

Just got the 7.5 10 bolt cleaned for paint and am a little confused as to what I have. Now I have not had the cover off of it, and it is sitting on jackstands. If I turn the axle by hand the other side turns the opposite direction like open carrier, Although the yoke does not turn. If I turn the...

Got the front suspension all bolted in minus sway bar and shocks .waiting on brake parts to get here

I made my mind up, that's what happened.

Old school it is . Just ordered intake and ignition controller