Tag: bind

Price: 42.50 USD

the main focus.

StreetRays No Bind steel shock mount relocation bracket is CNC laser cut and CNC formed to high tolerance so 

you can be sure that your installation will go smoothly. These brackets are designed rotate the lower mount for 

the rear shocks to prevent shock binding, which is exactly what the factory single shear lower mount would end 

up causing typically.

The brackets are Laser cut from 3/16″ USA steel sheet and feature 1/2″ bolt holes and 1.25″ opening between 

mounting tabs. Hardware is included as shown in pictures, all grade 8 hardware to ensure longevity of this upgrade.

Typical installation can be done with basic garage hand tools since these bracket simply mounts right back into the

original factory shock mounting holes.

Important NOTE: If you have factory or standard replacement rear shocks that mount over a stud that is bolted to the 

rear axle housing your lower rear shock bushing may not be equipped with a bolt sleeve. With our relocation brackets 

you will need to have a bolt sleeve through the lower shock bushing. With our brackets the required sleeves should be

1/2″ ID x 1.25″ long and the OD is whatever matches your lower shock mounting eye.