steering column

  1. vandeeperformance

    84 GP - Steering wheel play after turn signal switch replacement

    Hey, y'all. I spent probably a couple hours taking my steering wheel off and the column apart a little to remove and replace my turn signal switch (actual electronics, not lever). I went to put the wheel and such back in reverse order and found that my wheel moved around... a lot. Definitely...
  2. 8

    MALIBU Need some advice on column & wiper plan

    Hey Guys, I've been thinking and researching for this situation for a while now, but it feels so complicated that I'm having a hard time to make a plan. My current situations is as follows: Car is an '81 Malibu Steering Column It is a non original tilt column (i think from an 80's caprice...
  3. MakeMineaMonte

    Steering wheel hub adapter issue

    I'm trying to install a Forever Sharp steering wheel hub adapter on my 86 Monte Carlo. It seems as though the adapter won't fit far enough down on the splined center to allow for the spacer and nut to fit and complete the assembly. It also leaves a gap between the adapter and the steering...
  4. RegMan79

    Issues after turn signal switch replacement

    Hello, 79 Monte. Just replaced my turn signal switch only to find out that wasn't the problem anyway. It's where the lever connects to the metal linkage that goes to turn signal switch. It's busted where leakage meets lever basically. Had the car for about 2 months now and from what I understand...

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor