11.7 E.T 87 olds cutless

[87 supreme]

My personal best E.T. to date Hydraulic roller pump gas AFR headed 406.
sorry about the pics but my scanner won't play nice with my computer.

 

[87 supreme]

I forgot to add a few things... Full street trim 3450 certified state scale add another 225 for me. Full 3in exhaust with an X pipe hooker maxflow mufflers. I'm pretty happy with how it ran.

 

[BuWaGone]

Nice numbers! do you have a build or can you tell us more about your setup?

 

[87 supreme]

400 sbc 509 two bolt block, zero decked align honed bored .030, 3.75in scat iron crank. 6in I beam rods wiseco protru 20cc dish pistons, hasting's file fit rings. AFR 195 street heads 65cc chambers 9.75to1 comp. Lunati hydraulic roller cam 227-231 530-535- 110lsa lunati lifters 1.6 roller rockers. Edelbrock rpm air gap intake. 1 3/4 long tube schoenfield G body headers. Pypes 3in G body kit with X pipe. MSD dizzy 6al box taylor 8mm wires. F.A.S.T EZ efi fuel injection. Bowtie Overdrives stage 3 700r4 Edge racing 10in 3000 stall. 8.5 10 bolt moser axle 30 spline detroit locker 390 gear set. Jegs lift bars adjustable upper control bars. BMR anti roll bar. At the track I run D05 28X15 slicks.

 

[onebadasscutlass]

Good numbers! I Like your set up. Congratulations on your pass

 

[87 supreme]

Thanks I don't have a pic of the BMR bar installed next time I take the car to our shop I'll get some good pics of the Pypes exhaust it fit like a glove.

 

[marcar1993]

Are those mustang wheels? Are you running adapters to fit them?

 

[awdblazer]

is that a 4 inch cowl?

 

[JBreu]

That's awesome,flying for a street car and not much out there that can tough it on the streets. The 11's is where I hope to be soon. What rpm's you leave at?shift at ?? Congrats man!!

 

[Bweavy]

How were your 0-60 times before & after with the BMR bar?