1981 Monte SS Clone

[Eric_Monteman]

Hey guys and gals. Ive had my Monte for about 4 years now, and love it.
I race it in the summer in the 1/8 mile, and it was my dd till winter came.
Its got a 355/th350

My car with my friends 78'Bu








represtenting the gbodys



Race video
Click here to watch Malibu-vs-stang-race


motor pic

 

[Chevyman85]

Very nice! Your monte and the malibu seem to be inseprable! Very nice car. I like the pipes. Long dual exhaust looks so good on GBodys very well done! Your set up is very similar to what I'm running. Any more details? Specs? Looking good!

 

[Eric_Monteman]

Thanx dude.

010 z28 block
flat top pistons
stock heads (for now)
272 energizer crane cam
1.5 crane roller rockers
edelbrock intake
edelbrock 600cfm
holley high flow fuel pump. 3/8 fuel line
4-core rad
hedman headers
flowmaster 40's into 2.5 mandrel bent
megashifter, shiftkit


My heads, stock rearend, and torque converter are holding the car back.
But one thing at a time... :wink:


Heres a pic of my other buddys GP

 

[Chevyman85]

Nothing wrong with that 010 blocks are dynomite. Yeah sounds like all you need is a converter and some gearing and you'll be set! Theres always something you need, LOL its never ending! Nice car, I'd like to hear it! With that cam it should have a pretty lumpy idle?

 

[Eric_Monteman]

I'd like to hear it! With that cam it should have a pretty lumpy idle?

yeah it sounds healthy, But the cam is screwing me because there is too much overlap------> it wont go through any emissions test. :evil:

I should figure out a way to downdload a soundclip.

 

[4-Speeds]

Theres too many people from the bc board here... :shock:

 

[Eric_Monteman]

Theres too many people from the bc board here... :shock:

nice to see you too. I could of just used another username......

 

[4-Speeds]

I see I still need to work on my internet sarcasm.....

Anyways... What does it fail on emissions? I'm gonna put a pretty big cam in mine and i don't wanna turn into a permit wh*re.

 

[Eric_Monteman]

Anyways... What does it fail on emissions? I'm gonna put a pretty big cam in mine and i don't wanna turn into a permit wh*re.

Hydocarbons, my cam has to much overlap in the valves. In other words there is too much unburnt fuel. I would suggest not going too lumpy if you want to be able to go through aircare.

(mine)
Energizer 272h10---->2000-5000 RPM 272/272 adv duration .454/.454 lift

 

[4-Speeds]

hmmm wonder if this cam will pass...


Adv. Dur._____ Dur. @ .050 _______ Lift _______ LSA
268/276 ______ 227/233 _____.489"/.504"___ 110/106

If not... I guess its permit time..... 51 bucks for 3 days!