1985 OLDS 442 Temp sender/sensor help

[sergio]

I need help with finding these 2 sender/sensor . I need the connectors also. Or maybe part #s
The one on the left has 2 wires coming out of it but the replacement only has 1 wire. All these part stores have so many different ones.
Getting aggravated with all this 🤬 Thanks for the help

 

[69hurstolds]

The one on the left is your ECM temp sensor (p/n 25036092). It lets the ECM know if you're up to temp or not. Poor design, and from the looks of it, you know why. Sits on the outboard side of the driver side front of intake. It's the old-school style that's been replaced by a 2 wire splice connector pigtail and new sensor. GM p/n 12146312 is the newer style ECM temp sensor. It has an oval plug receptor on it. The new weatherpak pigtail for it is GM p/n 12101899. Or ACDelco # PT169.

The one on the right is your temperature gage. Sits closest to the thermostat housing. GM p/n 25036628. Connector pigtail for the gage is GM p/n 12085488, or ACDelco PT 110.

You're welcome.