1986 442 fender fiber optic signal bezel.

Status
Not open for further replies.
Jun 23, 2022
1
1
1
Looking for a right fender fiber optic bezel with the lenses
 

Attachments

  • CFB69A8A-F04C-4E79-8E0F-E65BA67CEBE7.jpeg
    CFB69A8A-F04C-4E79-8E0F-E65BA67CEBE7.jpeg
    22.8 KB · Views: 82
  • Like
Reactions: 1 user

78Delta88

Royal Smart Person
Supporting Member
May 23, 2022
1,245
1
999
113
SW Arizona
Hope you don't hate me, but had a set collecting dust. Finally tossed about 4 yrs ago.
 
  • Like
Reactions: 1 user

SS_Malibu

Royal Smart Person
Supporting Member
Sep 27, 2021
1,129
1,973
113
Mesa, AZ
I tossed a few things I should have kept. Before I pitch anything else I'll post them here.
 
  • Like
Reactions: 1 users

78Delta88

Royal Smart Person
Supporting Member
May 23, 2022
1,245
1
999
113
SW Arizona
Are these what your looking for?

I'll be up around Marana in a couple if weeks.
 

Attachments

  • Screenshot_20220709-192148.png
    Screenshot_20220709-192148.png
    1.1 MB · Views: 76
  • Screenshot_20220709-192205.png
    Screenshot_20220709-192205.png
    1.4 MB · Views: 81
  • Like
Reactions: 1 user

69hurstolds

Geezer
Supporting Member
Jan 2, 2006
8,087
17,292
113
Just an FYI, in 1979, they started with a first design, and then swapped sometime in the model year to a 2nd design, which was used from then on out on the A/G-body. I don't know what the differences were. Just going by parts info.

Good thing is, RWD 88, RWD 98 body used the same p/n for the housing, lens and housing gaskets on the fenders. Maybe even FWD Oldses too. Not sure about the other stuff that goes with it, though.

The RH housing p/n is 563552 and the gasket is p/n 563384.
 
  • Like
Reactions: 1 user

pagrunt

Geezer
Sep 14, 2014
9,122
15,255
113
Elderton, Pa
Just an FYI, in 1979, they started with a first design, and then swapped sometime in the model year to a 2nd design, which was used from then on out on the A/G-body. I don't know what the differences were. Just going by parts info.

Good thing is, RWD 88, RWD 98 body used the same p/n for the housing, lens and housing gaskets on the fenders. Maybe even FWD Oldses too. Not sure about the other stuff that goes with it, though.

The RH housing p/n is 563552 and the gasket is p/n 563384.
I'm going to have to dig out the set I pulled from a Caddy D-body to see if those are the p/n's on them. Might be good for the OP.
 
  • Like
Reactions: 1 user

69hurstolds

Geezer
Supporting Member
Jan 2, 2006
8,087
17,292
113
I'm going to have to dig out the set I pulled from a Caddy D-body to see if those are the p/n's on them. Might be good for the OP.
D-body Caddy 84-89 calls for 1617260 for either side, gasket "N.S.". Must be flat as Kansas on those caddy fenders.
 
  • Like
Reactions: 1 user
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor