34mm F41 3rd Gen Sway Bar installation

[1KWIKSIX]

Can anyone help me please. Want to know if I can use the 34mm factory clamps when installing on my G Body (Buick GN)?
or do I need to utilize the GN's 32mm clamps to attach to frame?

thanks in advance

dave

 

[timo22]

You must use the GBody clamps but 34 mm bushings. The 3rd Gen Fbody's clamps are offset and will not line up on a GBody frame. I would also recommend a slight trim on the top of the 34mm bushings. The fbody has a bigger relief notch in he frame to accept this bump. Hope this helps...timo22

 

[oldsmobile joe]

try these from o'reilly's, note the measurements and compare to your clamps, also, i had to trim the rectangular nub off of them. i used a razor blade. joe


Moog - Sway Bar Bushing Kit
Part #:

K6457

Line:

MOO
$19.99 Box of 2
Pick Up in Store
Call Store to Order
Ship to Home
In Stock
Compare
Stabilizer Bar Bushing Kit Front To Frame; 1-5/16 Inch Sway Bar Diameter
Inside Diameter (In): 1.34 Inch
Material: Thermoplastic
Outside Diameter (In): 1.76 Inch

 

[oldsmobile joe]

sorry, pic didn't transfer.