350 Rocket build

[Richie84cutlass]

I have a 1984 olds cutlass almost complete clone of hurst im found a 70 olds cutlass 350 rocket motor im currently having built its was bored 30 over forged flat top pistons ported &polished 6a heads apr head bolts eblebrock rpm performer intake going howard full hydrolic roller. With scorpion roller rockers manly push rods also going with pretty agressive cam. Can anyone help in recommending a carburetor for this setup also MSD headers and what kind of horsepower do you think I'll make

 

[Gwarren79]

Pictures are required.......

 

[TURNA]

The RPM intake is set up for a Qjet carb

Give Everyday Performance a call or contact techg8 on this site he is the owner of Everyday Performance

http://www.everyday-performance.com/

I am not a huge fan of the adapter plates

 

[DROLDS84]

Pics and more info on the engine needed such as cam,compression,etc.

 

[1bad79]

78/80 quadrajet set up for your engine cliff ruggles has a great book on them

 

[motorheadmike]

Why a carb when TBI EFI is almost the same money these days?

 

[olds307 and 403]

New out of box carb, Quickfuel 750 Slayer or Street Demon 750. One of the bolt EFI's is another option, the CCC 307 distributor can work for timing control. Did you use 2"/1.625" W31 valves? Which Howard's cam? What octane are you running? You have a minimum of 9.6 to 1, with 0 deck and any milling on the heads you could be near 10.5 to 1. I have used the Scorpion roller rockers, they are high quality. Sounds like a nice 350.

 

[olds307 and 403]

Contact Cutlassefi for a roller cam. Use the Cloyes billet roller 9 way timing set and degree the cam. You also need a thrust button/bolt to control cam movement. What stall/trans and rear gears?

 

[Richie84cutlass]

It's going to be 10 to 1 compression have Howards 4/7 cam swap

 

[Richie84cutlass]

I think I'm going to go with AED 750 HP ho no choke carburetor any thoughts