4 Speed conv. w/Hyd. Clutch

Status
Not open for further replies.

pontiacgp

blank
Mar 31, 2006
29,270
20,391
113
Kitchener, Ontario
What pedal setup are you using? it would be awesome if you could provide some pictures and a part number for your FBody parts. Thanks!!!!

I am using the G body housing and brake pedal, I cut the foot to match a stick car...I used the F body hanger bolt and the F body nylon bushings along with the F body clutch pedal. I lenghtened the F body pedal 3/4" and adjusted the angle of the pedal so it would sit slightly closer than braked pedal so I could slide my foot behind it to rest on highway drives. I removed the G body parking brake pedal and cables and installed the 3rd gen F body emergency brake set up.
 
  • Like
Reactions: 1 user

toner283

Not-quite-so-new-guy
Oct 22, 2008
39
31
18
Durham, Ontario, Canada
Lots of good info here: http://sickspeedmonte.com

Bernie Duplan (the guy who owns the Monte Carlo and runs that website) is a good guy. He was very helpful answering my questions and knows his stuff.
 
  • Like
Reactions: 1 user

pontiacgp

blank
Mar 31, 2006
29,270
20,391
113
Kitchener, Ontario
one other part I would get is the clip for the clutch pedal pin that they used on an A body ...the nylon retainer you get with the F body master is difficult to remove and the teeth usually break removing it.

41Uv14txx+L._AC_.jpg
 
  • Like
Reactions: 1 user

Scoot-71

Greasemonkey
Nov 13, 2018
102
157
43
Rio WI
I used Bernies st up, cost a bit more but works awesome, I did us the 3/4" master, but If I was to do it again I would go 7/8" master and work with the adjustment so it wont extend the slave to far,
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor