BUILD THREAD 87 Cutlass EFI build: 9/13/23..NEW STUFF!
- Thread starter Injectedcutty
- Start date
That's actually not a bad idea Mike. You talkin about them flex ones used alot on imports?
I have a cell. Unfortunately my BIL lopped off the front tank mounts without my knowledge. I have a brand new tank and OE filler neck, but had to resort to the cell I've had for over a decade.
These:
https://www.amazon.com/dp/B07P2BXNLL/?tag=gbody-20
And if you have slight alignment issues or need some flex/expansion:
https://www.amazon.com/dp/BLACKHORSE/?tag=gbody-20
2nd link doesn't work. This is what I was talking about...
Dang, I was so close to getting the exhaust finished tonight! I was able to use the rear upper control arm bolts to mount the hangers. After some trial, my neighbor had the jam nuts I needed to git r done! I did have to drill out the hole on the hanger, and put a twist in them, but they lined up perfect! Gonna try to find a longer piece of stainless exhaust tubing and instead of welding just clamp it so there is adjustment if needed. Here's a few gratuitous pics....
I stopped by a muffler shop that only does stainless stuff. Saw a super nice looking 84 Cutlass Cruiser, and bought a piece of tubing to button up the install. I'll need to trim it, but the neighbor has a big cold saw so I'm good.
Been there done that! If need be I ain't scared, but he has a metal chop saw and a portaband. Work smarter not harder.
Similar threads
