BUILD THREAD 87 CuTTlass EFI build: 1/10/19-4L80 mods!!

Injectedcutty

Injectedcutty

Comic Book Super Hero
Nov 24, 2014
3,035
7,002
113
Louisville, KY
Got the shift kit done and everything assembled back into the trans. Had to break for family stuff for a few, but gonna go back out and get the filter and pan bolted on so I can flip it back over.
20190110_212622-jpg.103518


Next chore will be lopping off the ears, adding more goodies, and maybe one more round of cleaning and a quick paint job to freshen it up.
 
Injectedcutty

Injectedcutty

Comic Book Super Hero
Nov 24, 2014
3,035
7,002
113
Louisville, KY
As luck would have it, something had to give me a hard time. The B&M shift cable bracket isn't really meant for the thick cast TCI pan, sooooo out came the files to get the needed clearance to bolt the bracket on. Also mocked up the cooler fittings....not sure if I'll stick with the banjo style ot not. They are pretty close to case, gotta put a hose end on and see.
20190111_002118-jpg.103535
20190111_003740-jpg.103537
 
motorheadmike

motorheadmike

Comic Book Super Hero
Nov 18, 2009
3,065
5,375
113
Ottawa, Ontario Canada
Yeah, that bracket gave me fits too. I may have spacers under it too. Also had some issues with the bolts and washers provided - some were changed out.

Nothing ever bolts on.
 
Injectedcutty

Injectedcutty

Comic Book Super Hero
Nov 24, 2014
3,035
7,002
113
Louisville, KY
Yeah, that bracket gave me fits too. I may have spacers under it too. Also had some issues with the bolts and washers provided - some were changed out.

Nothing ever bolts on.
Hmmmm, my bracket didn't have bolts, and the instructions said to omit the spacers if used with cast aluminum pans. Correct...nothing ever bolts on is a HUGE truth there!!
 
Injectedcutty

Injectedcutty

Comic Book Super Hero
Nov 24, 2014
3,035
7,002
113
Louisville, KY
Nice progress Scott! A little closer to the finish line....
Thanks Kevin!!!! It helps so much finally having a garage to work in, and the car at home instead of driving 20 mins each way to where it used to stay. It's safe to say my morale received a much needed boost.
 
1evilregal

1evilregal

Royal Smart Person
Apr 23, 2009
2,319
2,012
113
Greensboro, NC
love the progress! keep the momentum going!
 

Similar threads

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot Mike's Montes P-S-T Southside Machine Performance UMI Performance

contact [email protected] for info on becoming a sponsor

copyright ©2018 Ripp Technical Services, All Rights Reserved.