Hello I’ve been reading this forums for years but never posted. I have an 80 Malibu that im in the middle of ls swapping. Im currently replacing the inner fenders with metal trailer fenders like project sand bagger, but im keeping the a/c. Side note i am repairing the front of the box with fiberglass for more clearance around the passenger valve cover. The ac dryer hits the fenders I could chop and weld some crazy cylinder into the fender but im trying to keep it simple. Is there a condenser I could swap out from another vehicle that would come out of the heater box straight. Also i have seen repair kits for the lines but can find no info on them. If I could cut the line and use one of those that might be the ticket. Thanks any help would be great