ac / heater box exploded view with part numbers if possible

[rhinodad]

im looking for an exploded view of the ac / heater box with part numbers for a 79 elcamino im missing a little plastic piece for the temp control door it has a plastic clip that attaches a rod coming thru the fire wall
some kind of picture like this one of a chevy pick up but of the whole heater box

 

[rhinodad]

this little white clip is what im looking for the top part is broken

 

[69hurstolds]

The clip, aka "connector" as GM calls it, is p/n 20007898. It's the clip that the rod from the door connects to the "L" bracket on top of the heater housing duct. Ebay search will get you what you want.

 

[rhinodad]

The clip, aka "connector" as GM calls it, is p/n 20007898. It's the clip that the rod from the door connects to the "L" bracket on top of the heater housing duct. Ebay search will get you what you want.

thank you

 

[Ribbedroof]

The clip, aka "connector" as GM calls it, is p/n 20007898. It's the clip that the rod from the door connects to the "L" bracket on top of the heater housing duct. Ebay search will get you what you want.

So how about the clip that holds the cable to the control lever (3037629) for the temp door?

Don't see it in this diagram that was posted by 84 W40
https://gbodyforum.com/attachments/20190429_203541-jpg.112487/

 

[rhinodad]

are you talking about this little push on clip?
i need these too......

 

[Ribbedroof]

are you talking about this little push on clip? View attachment 114600 View attachment 114601
i need these too......

No, those I have and can get. We have them at work, they come in many sizes. I think the last time I used smallish ones was on a BMW Z4 grille

There's a clip that clamps over the cable inner that goes onto the stud on the lever. The retainer pictured goes on the stud after that to keep the other clip from falling off

 

[69hurstolds]

So how about the clip that holds the cable to the control lever (3037629) for the temp door?

Don't see it in this diagram that was posted by 84 W40
https://gbodyforum.com/attachments/20190429_203541-jpg.112487/

526850. But good luck with that. I've never been able to find any loose ones out in the wild. Comes with the cable from GM, if you bought them back in the day.

The only way that you can get them now, I believe, is to spend 40 bucks at Dixie restoration or Mike's Montes, etc., and get a new repro cable. Comes with the clip on it already. Probably need a couple of 5/32" push on retainers for the pins on each end as well.

 

[69hurstolds]

are you talking about this little push on clip? View attachment 114600 View attachment 114601
i need these too......

10 bucks will get you enough to do 50 cars worth of cables...…

https://www.amazon.com/dp/B0040D0O3G/?tag=gbody-20

 

[69hurstolds]

Hold on a sec....that clip part number was for the FORWARD clip that clips the rod to the door.

There's another clip on the lever that simply has a slot in it for the threaded rod. I'm still searching for this clip. I have a p/n I found from a Corvette forum, since they share a lot of the same blend door parts. So.....it may be 1224062 but I am not 100 percent on that.