Greetings all! I have a 1st gen SBC 350 in my 85 El Camino. I'm hoping there is a quick fix to this problem. I can't seem to find the correct brackets for my build. In short, I removed the old AC/Heater Box, installed a block-off plate and want to shift the alternator to the driver's side.
I've tried using kits from ICT and Bill's Hot Rod. Either there were clearance issues or the pulleys were way out of alignment. Does anyone have recommended bracket solutions?
I've tried using kits from ICT and Bill's Hot Rod. Either there were clearance issues or the pulleys were way out of alignment. Does anyone have recommended bracket solutions?