Anti roll bar?

[Burnhard]

Who makes the best fitting anti roll bar?
The one that fits the tightest around the 8.5 diff housing. Tight fitting as not hanging down?
Does anyone have picks of there anti rool bar installed.

 

[iameggor]

factory rear sway bar on my 84 Hurst/Olds with an 8.5 rear end.

 

[Burnhard]

after market anti roll bar that mounts to the diff?

Sorry for the poor post. I was looking for the best fiting aftermarket anti roll bar that mounts to the diff axle tubes. The factory bar fits like all bars should fit tight and clean to the diff housing.

 

[1SlowBu]

I kinda like the Spohn Anti-Roll bar but they're pricey.

 

[GhettoRacingKid]

Are you looking for bolt in or weld in?

weld in goes frame rail to frame rail.

I have a TRZ you cant see it unless you look under the car.

 

[1SlowBu]

TRZ is definetely good stuff . Maybe I misunderstood the question but I thought he wanted an Anti-Roll bar that fit tight to the differential housing.

 

[GhettoRacingKid]

Im not really sure either.

OP didnt state the purpose for it.

 

[Burnhard]

I kinda like the Spohn Anti-Roll bar but they're pricey.

Thanks for all replys. I was looking for a bolt in bar and the Spohn bar looks to fit very nice around the housing.The only negative thing I could say is I don't care for the lower part of the axle tube mount. V shape v full contact round style lower mount.
Thanks for posting the pic.

Sorry again I have to learn to post better.

 

[pontiacgp]

Re: after market anti roll bar that mounts to the diff?

Sorry for the poor post. I was looking for the best fiting aftermarket anti roll bar that mounts to the diff axle tubes. The factory bar fits like all bars should fit tight and clean to the diff housing.

I have an F body bar from a GTA. I used 3" muffler clamps on my 8.2 with the stock sway bar hardware . I bent the arms of the bar in about a 1.5" in on each side and used the hole in the cross member on the car to use the stock F body sway bar links. The arms are a bit long so I just rolled the bar to the back of the rear end to get the links straight.

 

[shanghaismith]

Hellwig 55809