Any idea on replacement center Caps for Sonoma wheels?

[Gwarren79]

I have the wheel below and was looking for Chevrolet caps , the original for the 1996-2000 S10 16" wheels are 15988450.

Anything else fit?

1990-1992 Camaro Caps don't fit as I have them and they are too small.

What i need

and this does not fit

 

[565bbchevy]

Actually I don't think they would look too bad with a push through center cap and have it an open lug design without the cover.

 

[Gwarren79]

I have these if I have to.......

 

[Ribbedroof]

You'll have to ream/hone the center bore to fit over the OE Malibu rotor hub, more if you were going to try a push-through cap.

AFAIK, the bowtie S10 and Sonoma GMC caps are the only caps that fit

In my experience, the GMC caps are more common than the S10, of 4 sets of wheels I've bought, only one was Chevrolet

FWIW, the deck lid bowtie from a Lumina will cover the "GMC" on the cap. Luminas were common in the u-pull yards when i got my first set

 

[Gwarren79]

ok, so I was playing around.......

original weathered cap and wheel cap in progress

 

[Gwarren79]

Almost done

I did'nt know you could polish the top....

 

[MrSony]

Junkyards are chock full of 90s s10 blazers/s15 Jimmy's with those caps.

 

[fleming442]

There ya go! Get ta polishing!
I bought some junk knock offs on Ebay for my Xtreme wheels, but they were plain with no bowtie (didn't want anyway).

 

[black_aerocoupe]

I thought some of the the 94-96 Impala 17" wheel owners were using a flat cap like your GMC flats, or the flat bowtie "What i need" caps. Maybe searching their tips out there, or reviewing sizes with ROH vendors (made the Impala wheels I think) will net results. Your flats look good!