Blazer Brake Upgrade

Trader history for timo22 (0)

timo22

G-Body Guru
Sep 10, 2012
534
508
93
58
St. Louis,Mo
#1
image.jpeg
I have several sets of Blazer front spindles and hardware for doing an upgrade on GBody front disc brakes.
The set includes the following parts:
2 Spindles w/ 6 hub bearing bolts
2 Dust Shields
2 Caliper Brackets w/ 2 bolts for spindles and 2 bolts for calipers
2 Brake Hose Brackets w/ bolts and clips
To upgrade your brakes ,you will need hub bearings, rotors, calipers,pads, and brake rubber lines.. I also recommend getting brake line adapters . (Edelman 258340) These adapters allow you to connect your hard lines to the Blazer brake hoses.
I do not supply the rotors , bearings, or calipers due to they are always in debatable condition, but the junkyards charge you like they are good. These parts also would add considerable weight when shipping.
The sets are $125.00 plus shipping. If you are interested, send me your zip code for a ship rate..Thanks for looking, Timo22
 

ssn696

Comic Book Super Hero
Jul 19, 2009
3,028
953
113
New Mexico
#2
This, folks, is a deal. And there are a diminishing number of these 2WD Blazers left on the world.
 

timo22

G-Body Guru
Sep 10, 2012
534
508
93
58
St. Louis,Mo
#3
Two sets sold, one set sale pending ..Two sets left. Thanks everybody, Timo22
 
Oct 14, 2008
9,098
2,237
113
Gainesville, Fl
#10
If you use G-body brake hoses, there's no need to use adapters.
I hope you don't mind me pointing that out, Tim.
 
Last edited:

Similar threads

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot GBodyParts Mike's Montes P-S-T UMI Performance

contact [email protected] for info on becoming a sponsor