86 MCSS, 90K miles G80 rear end.
I'm getting a clunk in the rear when going around corners and hitting a bump. The axle has just under 3/32" in/out motion which sounds exactly like the clunk. I inspected the C clips, axle ends and the center pin and they all show a little wear. Are there oversize C clip available? Even if they're a little too thick I can machine them thinner.
I'm getting a clunk in the rear when going around corners and hitting a bump. The axle has just under 3/32" in/out motion which sounds exactly like the clunk. I inspected the C clips, axle ends and the center pin and they all show a little wear. Are there oversize C clip available? Even if they're a little too thick I can machine them thinner.