C5 spindle from CPP
- Thread starter anton shylene
- Start date
- Status
Why this gotta get posted a week after I do the Blazer swap grrrrrrrr go figure! Those look super nice, what calipers?
the calipers is off a 2007 STS caddy with a 14 inch rotors it just bolts up just used two shims under the hub and the 13 inch C5 rotor and calipers is a bolt in.
because C5 vette brakes just bolts in and that includes six piston calipers with rotors. Blazers spindles require after market brackets.
Yeah I saw your thread too. I already had all the Blazer parts stored away that I bought a few years back. The blazer stuff is better than stock G stuff so I'm good for now.
not trying to start a fight, I'm glad cpp makes the spindles and that you like them.
it looks like the cpp c5 spindle is an equal to the blazer spindle. it all depends on personal preference and availability.
just for reference, kore3 sells brackets for the c5/c6 calipers for 14in rotors for $145 and i can pick up the blazer spindles for $60. and i usually get the wheel bearings as well as the needed nuts and bolts included with that price.
that means i'm financially ahead by several hundred dollars.
it looks like the cpp c5 spindle is an equal to the blazer spindle. it all depends on personal preference and availability.
just for reference, kore3 sells brackets for the c5/c6 calipers for 14in rotors for $145 and i can pick up the blazer spindles for $60. and i usually get the wheel bearings as well as the needed nuts and bolts included with that price.
that means i'm financially ahead by several hundred dollars.
i gotcha.... reason why i waited for the cpp spindles is because they dont require any adapters. everything just bolts up as it should.
much cleaner install in my opinion.
- Status
