Code 32 Baro sensor location

[elcotrk]

Can’t find Baro sensor
Nothing behind glove box.
Said it on inner fender passenger. Got bracket with two sensors 4 & 5 wires. Have a blue connector 3 wires with black, gray, & gray with red stripe no sensor attached never had one since I got it ran normal for years
Can you send pic of Baro would help
Haynes manual lacks
Thx

 

[stew86MCSS396]

Looks like this... https://knowhow.napaonline.com/wp-content/uploads/2020/05/CRB-219012.jpg
mounts to the 2 vacant holes in your pic. 3 pin blue connector plugs into it and the nipple stays open to the atmosphere.

 

[elcotrk]

Looks like this... https://knowhow.napaonline.com/wp-content/uploads/2020/05/CRB- 219012.jpg
mounts to the 2 vacant holes in your pic. 3 pin blue connector plugs into it and the nipple stays open to the atmosphere.

What is name of this part?
It is mounted on the inside of the bracket
Thx

 

[Clone TIE Pilot]

What is name of this part?
It is mounted on the inside of the bracket
Thx

That 5 pin module you posted is the ETC module.