MONTE CARLO "COPO" Monte Carlo SS - Turbosaurus Build (Swinging Dick Racing's c*ck got bent... she bounced a little too high & hard, & came down awkwardly)

Status
Not open for further replies.

motorheadmike

Geezer
Nov 18, 2009
8,976
27,522
113
Saskatchewan, Truckistan
I f*cking despise this Holley pan. But, after many hours of farting around I think I finally solved it.

View attachment 104815

If you look closely you can see where I had to grind the block... yes, the BLOCK to get the pipe in there. Nothing like laying under the car with metal shavings showering you. FFS, Holley.

View attachment 104816

The DS motor mount and trans mount had to come apart so that I could jack the engine up and get enough room to screw the fitting into the pan. You can see how there is sufficient clearance between the engine cradle and the fitting when it is set back together.

View attachment 104817

View attachment 104818

The pan fitting is half of a male and half of a female 1/2" NPT fitting sectioned and welded together. And then lots of grinding. This was the only way to get the fitting low enough to clear the engine cradle. Nothing off-the-shelf other than a banjo bolt (but, I am pretty sure they don't come with an NPT bolt). The pipe is built out of pipe plug, some 1/2" ID steel pipe, a 1/2" bolt, more pipe, and a -10 AN fitting from Vibrant. The whole idea here was to make it modular for assembly and ease of service. The drain hose will pass through the belt, and as such it needs to be serviceable.

View attachment 104819 View attachment 104820

So there you go. Just to prove it could work I did it... I shouldn't have. But, I did anyway.

Evidently the banjo bolt exists:

http://rover.ebay.com/rover/1/711-5...0001&campid=5335822911&icep_item=382214007714
 
  • Like
Reactions: 2 users

Texas82GP

Just-a-worm
Apr 3, 2015
7,981
18,676
113
Spring, Texas
I like Mike's fitting better. Built, not bought.
 
  • Friendly
Reactions: 1 users

motorheadmike

Geezer
Nov 18, 2009
8,976
27,522
113
Saskatchewan, Truckistan
I like Mike's fitting better. Built, not bought.

Thanks, much appreciated. But - it is nice to see a solution for other folks.
 
  • Like
  • Agree
Reactions: 2 users

motorheadmike

Geezer
Nov 18, 2009
8,976
27,522
113
Saskatchewan, Truckistan

Texas82GP

Just-a-worm
Apr 3, 2015
7,981
18,676
113
Spring, Texas
  • Haha
Reactions: 3 users

motorheadmike

Geezer
Nov 18, 2009
8,976
27,522
113
Saskatchewan, Truckistan

Took a bit of time to solve this.

Did some maths, pressed out the cruise control lug, drilled another hole 1.75" through the centre line of the throttle shaft, tapped both holes, and made a simple bracket out of some 3/16" plate aluminum.

20190509_221607.jpg
20190509_221558.jpg
20190509_224751_HDR.jpg
20190509_224731_HDR.jpg


Now I just have to put it all back together and sort out the TV cable and throttle cable bracket.
 
  • Like
Reactions: 2 users

motorheadmike

Geezer
Nov 18, 2009
8,976
27,522
113
Saskatchewan, Truckistan
Are you using a TBSS intake? Just finished one up for my build with the Warr 92mm TB. I used a bracket from GlenssAuto

https://www.ebay.ca/itm/TBSS-NNBS-L92-Intake-Manifold-Throttle-Cable-Bracket-WITH-CRUISE/283267499290?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

Nice quality with some adjustability. Just a thought.

Yes, I am running a TBSS intake. That bracket does look nice, but there is no way I am paying $50 for a piece of formed metal (he says having paid stupid money for formed metal pieces on what seems like a weekly basis). The real problem is that there are no provisions for a TV cable... so I will modify what I have on hand to suit. Wait out for more this weekend. ;)
 
  • Like
Reactions: 1 user
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor