Corvette C5 Brakes on Stock G-Body Spindle

Dayzedandkonfuzed

G-Body Guru
Feb 9, 2010
971
1,268
93
Anglemont, BC
Stumbled across this, so I had to give it a shot: Modify your stock hubs and spindles to upgrade to Corvette C5 brakes (12.8" rotors)

I managed to get spindles and rotors from a Malibu at pick n pull, so I was able to keep my daily driver on the road for most of this build.

First you have to cut the hub out of the rotor to be used simply as a primitive hub assembly. Once done, these hubs will have to be lathed down to a 5.85" diameter to fit into the Corvette rotor.

20160814_120137_zpsupsgybfh.jpg


20160814_120128_zps2mcmyowr.jpg


20160814_121951_zpshi2mcvmy.jpg


Then you need to cut the caliper mounting ears off of the spindle, and drill and tap 2 of the holes for your dust plate bigger to mount the adapter bracket. I tapped mine to M12x1.5. Big mistake, this thread pitch is hard to find in a high grade bolt (you will want minimum grade 8 in imperial or 10.9 in metric.) You'll also have to take your grinder to the spindle near these holes to provide a little clearance. You will see what needs to come off when you test fit your adapter bracket.

20160814_135602_zpsnb7cdqgn.jpg



Now you are left with this

20160814_153750_zpsrteuegdg.jpg


And you have to buy this

20160824_163435_zps2bbhpryx.jpg


And get someone to make you two of these, or make them yourself if you know what you're doing

C5bracket_zpsigjcjqmp.png


Now test fit on the spindle, and trim off what you missed, and re paint because you should have test fitted before paint

20160825_105734_zpsj5csrddl.jpg


Now press in some new, longer studs into your hub assembly (minimum 5/16" longer)

20160825_191719_zpsuk7vru32.jpg


Make sure to get studs that are .010" bigger on the knurl so this happens

20160825_190953_zpsp8vcqb8z.jpg


sh*t!!!

Now repeat step 1 with another g body rotor that are getting really hard to find, and buy some Moroso 46160 wheel studs that are the right size knurl. Now you can put the brake assembly together on the bench and test fit in your wheels, because you have 17" wheels that may or may not clear and you're hoping to get lucky after all this work.

20160901_210123_zpstai2rvmk.jpg


20160901_205450_zpsq8synggn.jpg


It clears! Barely! Now you can start taking off the weak *ss stock brakes along with the spindle. Carefully.

20160902_200418_zpsccs3p5vp.jpg


20160902_200953_zpstrb4jeqd.jpg


sh*t!!!!


And re-assemble

20160902_205747_zpssqaqaehj.jpg


20160903_161827_zpsfeznlrdk.jpg


20160903_180449_zps6j6urpqg.jpg


20160908_090130_zpspjaxeusk.jpg



That's it!


Parts List:
AC Delco 18FR1853/18FR1854 Calipers
AC Delco 14V55043/55044 Rotors
AC Delco 14D731CH Pads
Raybestos H5376 Banjo bolts (2)
SKF BR6 Inner wheel bearing (2)
SKF BR3 Outer wheel bearing (2) (BR34 for newer gbodies with metric wheel studs)
SKF 19984 Wheel seals (2) (3 if you crack a hub)
Moroso 46160 wheel studs (2) (different for newer gbodies with metric wheel studs)
Russell 657340 brake hoses (2) (these are 16" long, shorter would be better but it's all I had available. some guys say s-10 hoses work, or change to an s-10 hose bracket, but I thought this was the easiest way.)

Some tech notes:

I had to use spacers on the adapter bracket to push it away from the spindle by .110", as the caliper abutment bracket was dragging on the rotor. I'm willing to bet that you could have the adapter bracket made out of thicker material to compensate for this without issues.

You WILL need minimum 17" wheels with minimum 15.5" inside diameter. My wheels are just under that inside diameter, but these calipers taper down toward the outside of the wheel and I'm using 2" wheel spacers, so it just fit.

Some 17" wheels have clearance issues from the spokes to the outside face of the caliper (where 'corvette' is cast.) Torque Thrusts are one of these wheels. Keep this in mind. Some guys have had success grinding the caliper for clearance, and some guys took off too much metal and cracked it.
 
Last edited:
  • Like
  • Winner
Reactions: 7 users

oldsmobile joe

Royal Smart Person
Nov 12, 2015
2,067
3,053
113
mpls
that is awesome. nice write up. i did mine with corvette c4hd rotors and calipers over 10 years ago, just before it was discovered c5 brakes would work also. you will love the stopping ability of these brakes.
 

GuysMonteSS

Royal Smart Person
May 21, 2011
1,449
1,541
113
Kentville,Nova Scotia,Canada
  • Like
Reactions: 1 user

Dayzedandkonfuzed

G-Body Guru
Feb 9, 2010
971
1,268
93
Anglemont, BC
that is awesome. nice write up. i did mine with corvette c4hd rotors and calipers over 10 years ago, just before it was discovered c5 brakes would work also. you will love the stopping ability of these brakes.

For sure. They seem to feel just like the stock brakes with a little firmer pedal, until you hammer on them. These brakes stop quick!


For the guys with more money than time, that's the way to go lol. I'm into these brakes for under $500, but I know some people that sell parts to some people
 
  • Like
  • Agree
Reactions: 1 users

bigmandengo

Apprentice
Oct 16, 2010
72
6
8
Press in the longer studs before you cut down the old rotor. You'll have more meat left and will be less prone to cracking.
 
  • Like
Reactions: 1 user

oldsmobile joe

Royal Smart Person
Nov 12, 2015
2,067
3,053
113
mpls
for my c4hd vette brakes, i made the brackets. and when i switched my front knuckles to blazer, sealed bearing style, i purchased my brackets from kore3. both kore3 and flybye offer brake brackets. check them both out.
 

MALIBU'D OUT

Not-quite-so-new-guy
Dec 2, 2016
8
1
3
for my c4hd vette brakes, i made the brackets. and when i switched my front knuckles to blazer, sealed bearing style, i purchased my brackets from kore3. both kore3 and flybye offer brake brackets. check them both out.
10-4.. thanks for the info.
 

UNGN

Comic Book Super Hero
Sep 6, 2016
3,048
3,264
113
Southlake, TX
Press in the longer studs before you cut down the old rotor. You'll have more meat left and will be less prone to cracking.

Press in the right studs and they won't crack.

Moroso 46160 have a .560" knurl. The Stock studs have only a .501 Knurl... ouch.

A better longer metric stud is the Hummer H3 Stud: Dorman 610‑323 with a .505" Knurl
 

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor