Dorman replacement upper control arms

[TURNA]

Anyone using these things??

Any good?

They are 40 bucks complete with ball joints.

At that price its not even worth refurbishing the old ones



https://www.rockauto.com/en/moreinfo.php?pk=1027362&cc=1222906&jsn=408

 

[BOXCARS]

Even less, and why not?

http://rover.ebay.com/rover/1/711-5...0001&campid=5335822911&icep_item=311606510234

 

[565bbchevy]

I rebuilt the entire suspension on my Regal and replaced my rusty control arms with Dorman's, they fit well and I didn't have to do a thing but install them.
Between having to blast mine and R & R everything I couldn't pass up just installing a loaded control arm at a great price.
My time is worth money also.

 

[TURNA]

Are the lowers dormans too?

 

[airboatgreg]

Don't forget to grease the upper joint and tighten the nut on the sway bay bracket

 

[airboatgreg]

That sounds like a real deal/ How many miles so far?

 

[565bbchevy]

Don't forget to grease the upper joint and tighten the nut on the sway bay bracket

Yup, did all of that over a year ago

That sounds like a real deal/ How many miles so far?

Drove it a mile to the alignment shop currently waiting to get the time to replace the smoking 307 with my 355.

 

[airboatgreg]

One of my next projects is the front suspension and at that price it is a pretty easy decision on what to do

 

[joesregalproject]

I haven't really touched my suspension other than shocks and F41 sway bars, but once I have my engine back together and installed, it's probably the first thing on the list. These will make things a lot easier.

 

[TURNA]

The lowers I bought from somewhere else but they were bare so I had to install the bushings and ball joints that I bought off RockAuto.

Are they replacements or factory?