So I was asked by a member on here how I check the clearance from an air cleaner to the hood as I had mentioned in the "dollar store" thread I use generic modeling clay and I make little stands and stick them around the top of the air cleaner and then close the hood, and when you open it back up you will see where the clearance is.
I also used this method to measure to see how tall the safety foam on air pan had to be and as most people know the engine tilts back making the front of an air cleaner the highest part.
Simple to do and only costs a buck.
I also used this method to measure to see how tall the safety foam on air pan had to be and as most people know the engine tilts back making the front of an air cleaner the highest part.
Simple to do and only costs a buck.