for what are these plugs for?

GermanDude

GermanDude

Not-quite-so-new-guy
May 10, 2019
9
5
3
Germany, Brandenburg
#1
Hey Guys,
my car runs at the time without ecm. It needs a lot of gasoline and starts realy bad when the engine is cold.
My plan is to drive it whith the original ecm.

Dose anyone knows for what these two plugs are for? Ther is no part where it could be connected..

Thank you
 

Attachments

fleming442

fleming442

Geezer
Dec 26, 2013
6,159
7,054
113
#2
The green one is where you hook up a dwell meter to read the carb mixture solenoid cycles. Does not hook to anything.
Red one- not so sure. Probably something emissions related.
 
GermanDude

GermanDude

Not-quite-so-new-guy
May 10, 2019
9
5
3
Germany, Brandenburg
#3
Thank you.

Could the red one be the mixture control plug?
 
spidereyes455

spidereyes455

Master Mechanic
Mar 6, 2013
318
288
43
Northeastern PA
#4
Red one is for an anti dieseling solenoid, only used on vin Y 307 vin 9 doesn't use one and its not connected to anything. They both use the same engine harness.
 
GermanDude

GermanDude

Not-quite-so-new-guy
May 10, 2019
9
5
3
Germany, Brandenburg
#6
Hey Guys,
found the next one...
what could be this?
found it on passenger side fender.
thx
inked20190530_174802_li-jpg.114870
20190530_174748-jpg.114871
 
spidereyes455

spidereyes455

Master Mechanic
Mar 6, 2013
318
288
43
Northeastern PA
#7
Looks like power antenna.
 
Thread starter Similar threads Forum Replies Date
Stupidquestionspro Engine / Swaps / Driveability 4

Similar threads


Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot Mike's Montes P-S-T Southside Machine Performance UMI Performance

contact [email protected] for info on becoming a sponsor

copyright ©2018 Ripp Technical Services, All Rights Reserved.